Aluminum foil tape/foil adhesive tape

Specifications

Aluminum foil tape/foil adhesive tape

Adhesive: high performance synthetic rubber-resin adhesive.

Liner: easy-release silicone release paper.  

FEAUTURES:

-Aluminum backing provides excellent reflection of both heat and light.

-High quality adhesive with super strong adhesion and holding power offers reliable and durable

-Low moisture vapor transmission rate.

-Service Temperature range from -20 to +80ºC (-4 to +176ºF).fireproof material  

TYPICAL APPLICATIONS:

1. Used as the export equipment packing materials for moisture barrier, water-proof, fire-retarding and anti-corrosion.

2.  Processed to all kinds of fire-retarding products such as fire-proof packet, fire-proof suit, fire-proof bag, and fire-proof gloves etc.

3.  Used as the thermal insulation material on Roof,wall,floor,tank,vessel,air conditioner,tank,heat supply pipes or construction materials for the purpose of fire-retarding, anti-corrosion, heat protection and sound aborption.

4.  Packing chemical equipments such as oil and steam transportation pipeline.

PRODUCT FORM & SIZE AVAILABLE:

Roll Wide: 50mm/60mm/70mm/80mm/90mm/100mm/1.0m/1.2m or as customer request 

Roll Length: 50m/100m/200m or as customer request                

SURFACE PREPARATION:

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.  

PRODUCT USE:

It is essential that the user evaluate the product to determine whether it is fit for a particular purpose and user's method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on product between +10 ~ +40ºC (+50 ~ +105ºF).

We also Produce :Aluminum foil fiberglass cloth | Aluminum foil tape | Aluminum foil with adhesive | Aluminum foil tape without liner | Aluminum foil composite PP woven | Aluminum foil with PE woven | heat resistant material |  light weight heat resistant materials |  insulation for fireplaces  |  waterproof insulation |  thermal insulation fabric  |  boiler insulation material  |   pipe insulation  |  wall insulation duct insulation |  foil backed insulation |  reflective insulation |  ceramic fiber cloth with aluminum |  heat resistant building material | asbestos cloth with aluminum |  refrigerator aluminium tape |  aluminum duct tape | hot pipe insulation |  building heat insulation material

  aluminum foil tape

PRODUCT PHOTO:

 ISO CERTIFICATIONS:

ROHS CERTIFICATIONS:

  aluminum foil tape

HIGH QUALITY MATERIAL:

PRODUCTION EQUIPMENT:

PACKAGE:

FACTORY OUTSIDE:

WHY INSULATE ?

Insulation is necessary to reduce energy consumption, sound pollution and improve the comfort 

and quality of life in new or existing buildings regardless of the construction system.

Environmental quality Insulation fights global warming as it reduces greenhouse gases. 

Insulating your home is an ecological process. The signing of the Kyoto agreements was

 a major stage in collective awareness of the need to protect the environment by fighting

 global warming. 

Energy efficiency in buildings

Buildings account for 40% of energy consumption in most countries, yet their potential for 

energy efficiency is huge. By using adapted insulation and energy savings techniques, 

up to 80% of a building’s energy consumption for heating or cooling can be saved.

A strategy for improved energy efficiency of existing buildings is a necessity if the energy 

consumption is to be reduced significantly over a limited period of time. The life time of buildings 

ranges from 50 to 100 years and improvement of the existing building stock will thus have much

 higher impact than the tightening of requirements for new buildings.
“A building has a long life cycle, so its effect on the environment is a long and continuing issue to consider.”

Reducing energy consumption in buildings through their better thermal insulation

In a building that is insufficiently or not insulated, heat flows through the roof or the façades 

thus leading to increased energy needs for heating (in winter) or for cooling (in summer).

80% of the energy bill of a home owner is due to heating costs, therefore reducing energy 

needs must be a priority without sacrificing comfort. In order for everybody to achieve this goal, 

Saint-Gobain Isover proposes insulants to consumers with the best efficiency to 

invested money ratio.Insulation = savings

WHERE TO INSULATE?

To obtain a thermally homogenous home and reduce heat losses properly, provide comfort in 

winter and summer, all surfaces in contact with the outside (roof, wall, loft) must be insulated.

All walls and the roof in particular must be insulated

  aluminum foil tape

The thermal performance of insulation must be very high in the roof. In winter and summer, 

strong thermal resistance in the loft is essential.
In winter, losses are at their maximum through all opaque and glazed surfaces and structural links. 

In the summer, direct sunlight on the walls and roofs - particularly exposed - can overheat the interior temperature. The same goes for windows which need outside shutters,

 blinds, awnings, etc to deflect direct sunlight from the house.

In a home that is not properly insulated, heat escapes through: