Glass Stone Mosaic Wall Tile

Specifications

glass mosaic,stone mosaic

nice mixture make the perfect looks ,size,pattern,assorted colors can be produced as per clients' request ,avaliable for mesh backside or self-adhesive film unique design

Installation Instructions

1.Preparation of Wall Surface

Make sure the wall surfaces to be smooth,flat,solid,dry and perfectly clean.We suggest creating a white base about 2mm

2.Preparation for laying

Score lines on the surfaces to help the sheet posited correctly

3.Laying

Using the straight of a trowel spread out the adhesive uniformly on the wall.Make sure the adhesive covered all the surface.One time should be not more than 1sqm.A-Mosaic mounted on paper install the mosaic sheets with the paper side facing towards you and then using rubber float to ensure perfect adhesion.Wet the paper with a damp sponge and then remove it gently.Take out of any excess adhesive before it dries by a small spatula.B-Mosaic mounted on mesh Press the fiberglass mesh backing directly into the adhesive.

4.Grouting

Using a grout for particular care.For paper-faced mosaic,ensure that tiles are thoroughly cleaned and spread the grout using a rubber float.Make sure no more than 2sqm of area at a time.And then leave the grout drying.

5.Cleaning

Using a damp sponge to remove any grout.

6.Cutting

Using mosaic nippers cut tile by tile.Using a cutter for cutting the whole sheet.

7.Maintenance

Using normal neutral detergents for daily cleaning.Using a slightly acidic detergent for special cleaning

our shownroom

packaging details