China Lanjian Brand EP Fabric Direct Sales ISO9001 Certificate Industrial Using Rubber Conveyor belt

General Conveyor Belt

Specification:
1) Fabric code: EP/NN100, EP/NN150, EP/NN200, EP/NN50, EP/NN300, EP/NN400,EP/NN500
2) No.s of ply: 2~10
Classify by performance:
1) General use conveyor belt,
2) Oil-resistant conveyor belt,
3) Acid/alkali conveyor belt,
4) Cold-resistant conveyor belt,
5) Anti-static electricity conveyor belt, etc.
Application:
Suitable for conveying in harsh condition such as long distance, heavy load, high chemical corrosive etc, especially in humid conditions in coal mining, metallurgy, port, harbor, power, chemical, construction etc.

Heat resistant Conveyor Belt

Structure:
Heat-resistant conveyor belt adopts CC or EP as carcass material and SBR CR or EPDM as rubber cover.
Application:
Mainly used in Metallurgy, Construction and other industries,
For transporting High Temperature material, such as Sinter, Coke, Cement Clinker etc., Material
temperature should be not over 800°C, belt surface temperature should be no more than 220°C.
Characteristic:
1. High heat-and wear-resistance.
2. Good performance under designed temperature.
3. Long life span
4.The carcass has very high adhesion,low elongation.
5.Bear 250 °C,300 °C-600 °C in short time.

corrugated sidewall conveyor belt:

Corrugated sidewall belt is suitable for the horizontal, short distance condition..The angle will be not less than 30 degrees.
Characteristics:
1.Materials can be conveyed at a large slope up to 90 degrees.
2.The belt has large loading capacity and the materials cannot be scattered.
3.The slope of conveying can be changed from horizontal to sloping,or from sloping to horizontal.
4.The corrugated sidewall conveyor belt is simple in structure,flexible in arrangement and occupying only a small area.

Chevron Conveyor Belt

Characteristics & Advantages
Suitable for handing bulk material or bags up to 40 degree, slip resistant and better conveying capacity.
Chevron Type: Open V / Closed V/ L type/ H type/ Y type/ U type, etc
Belt Width: 300mm-1800mm
Chevron Height and Spacing:
Height(mm): 5, 10, 15, 17, 25, 30
Spacing(mm): 125, 200, 250, 330, 400, 500 etc
Note: The design of chevron can be depended on user's demand.
Application:
It is suitable for conveying power, granular or lump materials whose dip angle is smaller than or equal to 40 degree, or coneying packaged materials.