Good Quality Germicidal Portable UV Sterilizer/Disinfection For Iphone

How to use the UV Sterilizer?

Operation Steps:

1.Start to work with 4 pcs tripple A battery, put them into battery box, and make sure to close the lip of battery box cover.

2. Press down the slidable button on the both sides, the sterilization part will be popped out, and pull out the sterilization part, it will be stable position while you hear the sound "clickly".

3.Long press ON/OFF button for 2 seconds. LCD display (display sterilizing), at the same time UVLED lights, began to sterilization. The sterilization complete press the ON/OFF key.

4.TIME Settings:The state of power-on,long press TIME button for 2 seconds, the screen flickers, touch TIME key again, skip to 1 minute TIME, each at a time you press, respectively, in 1 minute, 5 minutes, 10 minutes, long(the order of the cycle; Selected time press the ON/OFF button began to to sterilization.

5. When finish sterilizing, please push the steriliztion part to the whole housing, the transparent quart glass is very easy to be damaged, please handle and use it carefully.

6.In order to maximize effect of sterilization, sterilization, please send quartz plate near sterilization object parts as close as possible.

Installation Instructions and Warnings:

•According to the steps to install it carefully. Avoid it out of work.

•Put it away from the children.

•To achieve the best sterilization effect, each two week quartz glass cleaning.

•Since  UV light can be harmful to eyes, do Not look directly into the UV light, even through an optical instrument.

•UV protective glasses are required to use in order to avoid damage by UV light in case of viewing UV light directly.