CRW AL0019 infrared sauna room

CRW  AL0019  infrared sauna room

Product Description 

Size: 2100*1500*2100mm (82.7''x59.0''x82.7'')

1. Use general liquid detergent and soft cloth for daily cleaning of the cabinet. Do not use detergent containing acetone or ammonia component. Do not use disinfectant containing formic acid and formaldehyde for disinfection;

2. To wipe off dirt or stain on the surface, please polish with toothpaste and soft cloth;

3. To clean dirt or stain on hardware fittings, please use soft cloth, never use hard cloth or any detergent;

4. To remove minor stain scratch or cigarette burn on surface, please polish with #2000 sand papers dipped into water before final treatment with polishing paste.

5. It is recommended to clean the steam generator for 20 times of thermal cycle. During cleaning, dilute 5-10g of citric acid with 0.5-1.7 liters of tepid water first, and then fill the solution into the steam generator through the steam outlet with a hose, wait for 8-12 hours, and then connect the power and press the steam key to heat for 5 minutes. Then turn off    the switch, and the system will impurities automatically.

6. Do not turn on the power of sauna furnace without the sauna stones, otherwise it will damage the heating units;

7. Do not use the water with chlorine or sea water, otherwise it will damage the sauna furnace.

8. Ensure the normal supply of cold water while starting the steam switch, otherwise it will damage the steam generator due to the dry heating.

9. It is recommended after times use to clean water circulation network, to check pipes, wires, plugs, etc,;

10. To lengthen working life, please enjoy steam function no more than 3 consistence hours one time;

11. The power supply should be turned off each time when the steam is finished;

Certificates

CRW Showroom

CRW Factory

CRW Global Projects

CRW Considerate Service

Before-sales service

1.Professional introduction and explanation about company, product, production, insurance, delivery and documents, etc ;

2.Provide necessary information and material to clients;

In-sales service        

1.Professional engineers and experienced workers to take care of production, testing and packaging of each order;

2.Recommendation and assistance in insurance, delivery and documents;

After-sales service

1.Quality guarantee and following service;

2.Spare parts support and operations consulting ;

3.Sales tracking and feedback for further market development through calls, emails and meeting, etc;