DTH Quarry drilling machine

Pneumatic DTH drill machines are mainly used for perforation working during stone quarrying. For drilling the holes of introducing the diamond wire saw, with features of easy operation, high working efficiency and easy to converge the holes.

Full Pneumatic Down-The-Hole Drill Machines commonly used for drilling use a pneumatic system: the energy thrust is transmitted by compressed air. In fact Down-The-Hole Drill Machines need air compressors. The pneumatic hammers penetrate the rock mass by means of a drill rod that is nothing more than a shaped steel rod. The pneumatic system is supported or sometimes substituted by the hydraulic system in which hydraulic oil instead of air is used to transmit the energy.

Features: 

1- The drill is equipped with pneumatic rotation head which combined with the hole hammer permits drilling linearity to maintained, reaching considerable depths at high penertration speeds. 

2- The support coloum has special fixing system with a spherical joint and an anchoring down jack which permits drilling in all directions.

3- Permit the drill height from the ground to kept to a minimum, in the case of horizontal drill. 

4- Lightness of the structure are easy for handling and transportation.

Major technical parameters of Full Pneumatic DTH drill machine: 

When inquiring please sending the following information for our technical reference:

1. The type of motor (Full Pneumatic / Pneumatic& electric / pneumatic &hydraulic)
2. Diameter of the down-the-hole-hammer (65mm/ 90mm)
3. How many meters of pipe needed.
4. Special requirement (if any).

Packaging: All packing will be done with protection against damages while transporting.

Delivery time: In 7 days for one set of DTH drill machine.

1. Wire sawing operational assistance service.

2. Proposal for quarry development and plan, if necessary.

Related photos of DTH drill machine:

Quarry drilling machine

Quarry drilling machine

Quarry drilling machine  

  Quarry drilling machine Rock Drilling Machine

Quarry drilling machine  Rock Drilling Machine

Quarry drilling machine  Rock Drilling Machine

We, KEEN TOOL is a specialized manufacturer of diamond tools for construction industry with 20 years experience, and we mainly concentrates on series equipments and diamond wires for stone quarry work and construction work in recent 8 years. We monthly produce around 8000 Meters diamond wire and 30 sets quarry equipments now, 80% of them are for export to USA, Brazil, Australia, South Africa, East & West Europe, especially our LQ & ROC series diamond wire for natural stone quarry work, shape cutting and controlled demolition of construction (for concrete, reinforced concrete and steel rebar).

KEENTOOL will be best solution for customers in fields as below:

1. Diamond Wire for stone quarry, blocks trimming and profiling.
2. Diamond Wire for controlled demolition work of construction with structure of concrete, reinforced concrete and steel.
3. Wire Saw Machine with variable speed and step-less tension system for quarry and block cutting.
4. DTH drills with complete Pneumatic system, or Pneumatic & Electrical system for drilling the wire hole.
5. Conventional Diamond Tools for processing stone and other construction materials.

Welcome to visit our website of or http://keentool.en.china.cnto know more about us.