Stainless Steel Shot 304 410 430 SUS410 SUS430 SUS304

2. Stainless Steel shot Technical Indexes

1. Package Terms:

• 25kgs/bag,40 bags in a weaven bag
• 25kgs/bag,40 bags in a pallet 
• 25kgs/ papper bag, then 40 papper bags in a pallet
• 25kgs/bag,40 bags in a pallet within a box case
• 1000kgs in a bulk bag
• 970kgs in a drum

2. SHIPMENT TERMS:

5-7 working days after receving the advance

Advantage

Snder is supported by qualified and experienced management, we have evolved as a leader in manufacturing, supplying, wholesaling, distributing and exporting a wide assortment of Cut Wire Shots. Our product range comprises Cut Wire Shot in Carbon Steel, Stainless Steel, Aluminium, Zinc, Lead, Copper, Conditioned Cut Wire Shot and many more.

SNDER is suitable to replace many other Non Metallic abrasives with its superior life and performance.

Recyclability

Exceeding the life of aluminium oxide, glass beads, mineral abrasives, garnet or slag by nearly 1000 to 1, SNDER can significantly reduce your raw material and disposal costs.

SNDER is non-hazardous and contaminant free as received. During use it produces no free silica or associated respiratory and environmental hazards. Any metal dust created during use is insignificant, allowing for a virtually dust-free blasting environment.

Energy Transfer - Speed of Cleaning

Blast cleaning is an operation in which the work surface is pounded by successive impacts of flying abrasive particles. This impact energy of the abrasive is related to the mass and velocity of the particle being thrown. When the kinetic energy in a particle of abrasive is expended on the work surface, the contaminant is loosened and removed. Thus, the greater the impact being delivered per particle, the greater the speed of cleaning. SNDER’s greater mass / density delivers more power to the surface improving the cleaning rates and lowering the abrasive consumption costs.

Abrasive Work-Mix

An efficient abrasive work-mix contains a balanced distribution of large, medium and small particles. This distribution is constantly undergoing change because of abrasive deterioration caused by repeated impact with the work surface. Maintaining a proper balance can be difficult with short-lived abrasive because of its rapid breakdown and removal from the system. These fluctuations in the size distribution directly affect both surface finish and productivity

SNDER’s superior durability provides a more consistent distribution by remaining in the work-mix long after other non metallic abrasives have fractured and been removed by the dust collector.

 contact: Rabia Liu 

Wechat:wj15966624287

Phone: 0086-15966624287 

E-mail: rabia(at)

steel shot: S70,S110,S130,S170,S230,S280,S330,S390,S460,S550,S660,S780,S930

steel grit:G120,G80,G50,G40,G25,G18,G16,G14,G12,G10

Q: Do you have the right to export? 

A: Yes, we registered in the Customs and gained the right to export by ourselves. 

Q: What’s the MOQ do you carrying out?  

A: We accept MOQ 500kgs normally. If you need less, you can contact us, we will see if it is OK.  

Q: Can you provide free samples?

A: Yes, can forward free samples less than 200gs if possible.  

Q: How to contact?

contact: Rabia Liu 

Wechat:wj15966624287

Wahtsapp/Mob.: +8615966624287 

E-mail: rabia(at)