Portable waterproof digital water quality tds meter

Portable waterproof digital water quality tds meter

Technical data:

Description:
TDS is the total weight of all solids (minerals, salts and metals) dissolved in water. The lower the TDS level is, the purer the water is. The unit could provide 1000 hours of continuous usage, is ideal for using in the following situations: drinking water, water filters, hydroponics, aquariums, food & coffee, pools & spas.

Product detail:

Operating instruction:
1.remove the protective cap.

the ON/OFF button once out of the water. The tester will read “000”

3. Immerse the tester into the water no more than 2 inches.

4.wait for the display to stabilize. The tester automatically compensates for temperatures variations. Once the readout stabilizes(10-30seconds), press the HOLD button to view out of the water.

5.To use the thermometer, turn the meter on and press the" C/F" button. Pressing the "C/F " button again will switch it to TDS mode.

the ON/OFF button again to turn off the tester. The tester will shut off automatically after 10 minutes of non-use.

7.after usage, shake off the water from your tester or wipe it with a tissue.

Note: If the tester displays a flashing”X10”icon, multiply the reading by 10.

Important: do not drop the entire tester in the water or dip beyond the maximum 2” level.

This product is not waterproof. Tester is not meant to used in hot water.

Calibration: your meter has been factory calibrated to324ppm,which is suitable for most applications.
Re-calibration may be necessary from time-to time, depending on usage.

Protable package: