2016 hot sale good quality Q235 steel bar mesh

Features of reinforcing mesh 
The unique deformed wire pattern (curry pattern) offers superior bonding, improved stress distribution and crack-width control
Ferro-Fabric is available in a wide range of diameters and apertures. The products can be bent to shape as required
Manufactured from hard drawn wire (smooth) and cold rolled wire (deformed)
All intersections are resistant-welded thereby not reducing the tensile strength of the wires
Mesh has an average shear strength equal to 80% of the wire strength
The wire used has physical properties which are rigidly controlled to produce mesh with maximum weld strength combined with ductility
The steel specifications allow for cold rolled wire with a minimum ultimate tensile strength of 510Mpa and a high resistance to fatigue
Mesh is available in black (pre-galvanised) and galvanised sheets or rolls
Also available on request: plastic coated and hot dipped (galvanised) mesh 

Quality Control
Reinforcing mesh is produced to highest quality standards and complies to ISO 9002. Thorough testing of wire strength, welds and aperture sizes is continuously performed at all stages of the manufacturing process. Final inspections ensure that highest standards are maintained. 

Standard Sizes
Reinforcing mesh is available in rolls (60m x 2,4m) and sheets (6m x 2,4m), manufactured according to standard sizes. Wire diameters vary from 3,55mm to 12mm. Mesh aperture can be as small as 100mm x 100mm.

 
Special Mesh
Specialised machinery is used to produce weldmesh with non-standard aperture sizes. The spacing of wires in either direction is variable between 25mm and 150mm. Customised mesh is available on request according to specifications provided.
the Reinforcing Mesh Data Sheet 
Standard sizes of welded mesh fabric

Specifications: Sheets: 6m x 2,4m or Rolls: 60m x 2,4m
Based on SABS 1024/2006 specifications for welded steel fabric for concrete reinforcement