2000LM LED Bicycle Headlamp 3*CREE XM-L T6 4 Modes LED Cycling Flashlight LED Bicycle Light

Specifications

Description: 

• Can be used as Bicycie Light
• Model of LED: 3*cree XML T6 LED
• Output bright can come to max 2000 lumens
• Internal wiring applies the high efficient booster circuit, working voltage is wide and can utilize the batteries in the largest extent.
• Waterproofing design
• Aluminum alloy casing
• Aluminum alloy reflector
• 4 switch Mode: one led Brightness /two led Brightness /three led/ Flashing
• 100v-240v Battery Charger ( LED indication for Power On / Charging / Full charge )
• Model of Battery required: 1 x 8.4v 4400mAh Battery Pack
• Head Colour :purple
• Can working for Max mode for 2hours.
• Can light up for long distance.

Major Features:

Shock-resistant 

Fixed in on the bike, as a lamp use

Long battery life, can be used circularly 500 times above 

high temperature resistant, prevent fall off, the effect is perfect

Elastic deck, suitable for various types of bicycles, easy to remove the replacement

Can be fixed on a bicycle, use as a lamp;

With Elastic rubber band caps, with the lamp when theheadlights use.

Detail Description:

1.Using three CREE XM-L T6 led lights,brightness can reach 2000lumens.led life up to 100,000 hours!

2.Intelligent digital circuit control,three-mode memory dimming circuit.
   (1)Low: brightness 500LM  with one T6 led light on.
   (2)Mid: brightness 1000LM with two T6 led lights on.
   (3)Hig: brightness 2000LM with three T6 led lights on.
   (4)Strobe: brightness 2000LM  with three T6 lights on.

3.Vacuum plating smooth cup,high temperature resistance,anti-fall,high reflective effects,perfect facula

4. Housing Material: Aviation aluminum alloy,CNC machining,anodic hard oxidation treatment,designed with an attacking head.

5. Using 4pcs 18650 2000mah to make a battery pack in silicone(2pcs in parallel,2pcs in series),capacity: 4400 mAh,voltage: 8.4 V,with two bicycle fixed rubber ring,special design for bicycle fan.you can continuously use more than 2 hours;working voltage indication:red light on below 5.4V,green light on between 5.4V and 8.4V,pls charging it when the red light is on.

6. Features: 1. Fixed on the bike, as a bike led light;Lighting Angle can be adjusted at random.
             2. with elastic deck,applying various models of bicycles, easy to remove and change. 

7. Note: a. Charging in safe place;
         b. Do not remove the battery,in case it will affect properties of products and be dangerous.