shell end mills carbide or HSS material

Specifications

 carbide or HSS shell end mill cutter  

Shell end milling cutter type N suitable for milling machines, construction, deployment and hardened steels 

up to 1200 N / mm ² and for short chipping nonferrous metals.

1. HSS Shell & Roughing Shell End Mill
2.used to milling plane and steps
3.shell face milling cutter

1. Spiral Shell End Milling Cutter

2.material can be solid carbide, hss, and other material

3.can supply OEM service as per your drawings.

Warm tips: In order to have a good cutting surface and extend the cutting tools life, a tool holder with high precision, high rigidity and good dynamic balance is required.

1. Measure the runout of the cutting tools before using, and if the run out is more than 0.01mm, please readjust first.

2. The shorter of the length of the stick-out cutting tools is, the better the effect is. If the stick out part is too long, please re-adjust the rotate speed, feeding speed and cutting output.

3. When hearing unusual sound during the cutting process, please slow down the principle axis’ rotate speed and the cutting output until the unusual sound is disappeared.

4. Cooling the steel in a spraying way can maximize the TIALN’s effect. Water-soluble cutting fluid is not suitable for stainless steel, titanium alloy and heat resisting alloy.

5. Cutting method is selected according the type of the workpiece and machine.

The above information is provided for informational

Welcome to inquire about DIN1880 HSS Shell End Mill Cutter, we'll reply you by offering all the information you need with 2 working days, thank you!