High precision custom automotive die casting aluminum parts

                    High precision custom automotive die casting aluminum parts

    Die casting component  is the process where molten metal is injected into a mold under high pressure in the range of 10 – 210 Mpa. This will result in a highly uniform casting with very good surface finish and exceptional dimensional accuracy. Usually this can either eliminate or greatly reduce the machining required to finish the part. There are two main processes in High precision die casting component:

 1. Cold chamber process:

Metal is ladled into the injection chamber for each shot. There is less exposure of the molten metal to the chamber walls and plunger. This is very useful for aluminum and copper alloys that would easily alloy with iron at elevated temperatures.

2.  Hot chamber process:

It has the injection chamber which is connected to the die cavity permanently immersed in the molten metal. The hot chamber process is used for metals of low melting point and high fluidity such as tin and zinc.

_______________________________________________________________________________________

Manufacture Capability

Products 

___________________________________________________________________________

Equipment 

——————————————————————————————————————————————————

Testing equipment 

__________________________________________________________________________________________

Company information

International businessmen

_____________________________________________________________________________________

International Certification

______________________________________________________________________________________________

If you have any question, don't hesitable to contact us: