Portable high frequency galvanic facial machine

Portable high frequency galvanic facial machine     

1.Manufacturer;CE

2.Vacuum&spray

3.Ultrasonic

4.High frequency

5.Iontophoresis machine

ULTRASONIC

1. Function:

It was invented in the 80’s to the Beauty Business. It can cure a lot of skin problem and accelerate problematic skin healing. Easy to operate that pop welcome by the majority of the beauty professionals and it is also a great investment for them. It has 3 main functions:

Mechanism Aspect

It can soft the skin tissue, accelerate absorption of skin products, increase body metabolism and blood circulation, gently stimulate the nerve system and cells etc.

Heat Aspect

It can accelerate the body metabolism rate and blood circulation. Calm the nerve tissue and help get rid of pain.

Chemical Aspect

It can accelerate the skin metabolism rate. Balance the PH value of the skin tissue. Help skin absorb treatment products and intensify sterilization.

Therapy and Beautification Function:

To help treatment product to sip through the skin with the following particular function:

1. Not limited by the quality of the treatment products whether it is ion (+/- molecules), water-soluble or medication.
2. It is more effective than rubbing treatment products into the skin since it will help skin absorb the treatment products.
3. Not. Limited by ion (+/- molecules) of the products.
4. Treated areas can stay fine after treatment.
5. Will not cause electricity shock
6. Easy to operate and make treatment products easy adhere to the skin.

Beautification

1. Soften blood vein and even out red face.
2. Rid pimples and acne (every ten days is served as a course)
3. Rid skin pigmentation. Use with high unit Vitamin C skin products to accelerate skin rejuvenation process. Expect to see result after 3 treatments with optimum result after 10-40 treatments.
4. Prevent and rid the formation of wrinkles, soften blood vein and face-lift. Due to the increase of body metabolism rate, it helps rid the said problem on a day-by-day basis.
5. Rid eye bags and dark circles. Message the delicate eye areas to rid excess water, puffiness and dark circles.
6. To soften skin tissue by message. Make it look and behave delicate and soft.
7. Accelerate the process of any skin treatments and achieve optimum results.

Instruction:

Before operation, first clean face well with clean facial cream.

Wash off the cream then steam face 10 minutes.

Clear over the comedo on the face.

Spread shrink water on the face and tap it gently then wipe off it.

Test skin conditions then spread the suitable medicine cream on the face.

1. Turn on the machine then adjust the power of probe to fit skin well.
2. Set timer to show 15 minutes the normal work time.
3. Press the button to choose type of wave shape out.
4. Massage on skin covered medicine cream with probe.
5. After over the operation, turn off the machine and clean the dirty probe.
6. If use the machine coming with the Chinese traditional medicine mask powder, it will have better effect.

Caution:

First clean face (or wounded area) before operation.

The medicine cream used should be mucous to be absorbed in better by skins, at the same to avoid burning the probe.

Work time set to 15 minutes and it is enough at the normal conditions.

Don’t make the probe to be near eyes or touch eyes to avoid hurt.

Don’t make the probe in work but not operate to touch skin, for to do that is easy to burn the probe for over heat.

Beauty Instrument Specification:

1. The electricity voltage is 1.00MHz, 1MHz (with timer)
2. Operation time: 1-30 minutes (adjustable)
3. The intensity has 10 volumes. Green-3, Yellow-3, Red-4.
4. Electricity Output rate: 0-10W, adjustable.
5. Pulse rate is 4Hz.
6. Electricity Input rate: 110V/220V /240V(with adjustable On/Off) 50-60Hz.
7. Electricity supply rate: equal or less than 40W.

HIGH-FREQUENCY

1. Function:
2. Use special Ultraviolet rays intensity to treat the skin that sterilize the skin and accelerate wound healing.
3. To get rid of spots, pigmentation, pimples and acne.

Instruction Procedure:

Insert the Ozone electrode into the handle and keep touch well.

Connect the plug to the power outlet then turn on the machine.

Turn the button of energy lever to choose appropriate level according to skin conditions and type then begin to operate.

After over the operation, turn the button of energy lever to “O” mark and turn off power, pull out the electrode and clean well and dry storage.

Caution:

Take off all metal decorations (earrings, necklace etc.) before operation.

During the operation, not to stay too long time in a treated area to avoid scars.

After over the operation, used electrodes should be cleaned and dry storage.

VACUUM & SPRAY

1. Function:
2. To thoroughly get rid of all dirt, impurities fat from the deep pores of the skin.
3. To make the suction/spray medicine water to spray as mist to nourish and calm skin.

Instruction Procedure:

1. Connect small suction glass tube to the suction/spray hose, put the hose to the suction port of machine, press the small hole on the small glass tube, then machine is ready for suction operation.
2. Connect spray bottles to the suction/spray hose, put the hose to the spray port of machine, press the small hole on spray bottle then the machine is ready for spray like mist.

Caution:

There are three types of glasses of which should be used separately according to any specific parts of the body.

After over the operation, used glass tubes should be cleaned and sterilized and dry storage

Galvanic

      1.  Function:

1.     To thoroughly get rid of all dirt, impurities fat from the deep pores of the skin.

2.     Nourish skin and improve skin conditions

     2.   Instruction Procedures:

Put the negative iron bar into the hand of client.

Dip proper Gal-out medicine water with a small blade make-up cotton and stick to the roll gear of the Gal-bar, coinstantaneous spread proper Gal-out medicine water on the client’s face.

Place the Gal-bar on the client’s forehead, press the button to “+” mark and turn on power, the machine is ready for Gal-out work.

It will take 4-6 minutes operating time.

The Gal-in operation is same as the Gal-out operation. (note: Gal-in operating should press the button to “-” mark.).

After over the operation, first turn off power then remove the G-al-bar from the client’s face

Related facial care machines:(factory sale)

TM-272

TM-269

TM-256