EJ073 Made in China Cheap Tiger Bamboo Flooring

Specifications

EJ073  Made in China Cheap Tiger Bamboo Flooring

We are the one of largest manufacturer for producing Strand Woven Bamboo Flooring in China and we are in line of doing bamboo flooring business for years. Here have rich and quality bamboo resources.

Name:Tiger Bamboo Flooring

Specification: 915x96x14mm, 1850x96x14mm, 1850x125x14mm, ect.
Material: 100% Bamboo
Moisture Content: 8-12%
Color: Natural and Carbonized
Edge: Micro-bevel/square
Glue: E1 or E0 environmentally friendly
Roller Coating: Coating 7 layers for faces, 2 layers for base,Click
Installation Method: Click/ T&g
Glossy degree available in: Matt finished /Semi-glossy

Product Details

Tiger Bamboo Flooring

 Our Factory

Our samples of product:

Installation Instruction

Dear customer, thank you for buying EverJade bamboo flooring. To provide better service for your usage and protect your rights, please conform to the following installation instructions strictly. We should not bear the responsibility caused by any operations that disobey the following rules.
Minimum acceptable jobsite conditions
Flooring is one of the last jobs of any construction project. Bamboo flooring installs just like traditional tongue-and-groove solid hardwood flooring. Any professional flooring installer can easily install EverJade bamboo flooring with excellent results.

Prior to delivery of the bamboo flooring a site evaluation should be done. Please check for the following:
1. The building should be completely enclosed.
2. All outside doors and windows must be in place and have latching mechanisms.
3. Surface drainage should direct water away from the building.
4. All concrete, masonry, plastering, drywall, and other wet work should be completed and thoroughly dry.
5. All texturing and painting primer coats should be completed.
6. In warm months, the building must be well ventilated each day.
7. Be sure the flooring will not be exposed to extremes of humidity or moisture.
8. Interior environmental conditions must be near the average for the geographical area. 
9. Basements must be dry.

Crawl spaces
1. Crawl spaces must be dry.
2. Crawl space must be a minimum of 18 in. (400 mm) from ground to underside of joists.
3. The crawl space earth must be covered 100% by a vapor retarder of 6 mil black polyethylene.
4. Where a proper ground covering is in place, the crawl space should have perimeter venting equal to a minimum of 0.16 of the crawl space square footage.
5. Vents should be properly located to foster cross ventilation.
Note: Local-building codes may differ. Local building codes prevail. Follow local building codes.

Getting started
1. Keep the boards in room temperature for at least 24 hours in unopened package before starting the installation. The room temperature must be at least 18¡æ before and during installation.
2. Check the floorboards and make sure that the surface has no transport damaging before starting installation.
3. For floor surfaces exceeding 100 m2 and/or lengths exceeding 10 m and overlaps to new rooms and floor surfaces which do not join symmetrically, use expansion joints to divide the floor sections.
Note: If possible, the moisture content of the subfloor and bamboo flooring should be checked by an appropriate method. There should be no more than 4% moisture content difference between properly acclimated bamboo flooring and subflooring materials, taking into consideration normal living conditions and equilibrium moisture content (EMC).

1 Fixing -style installation
1.1 Lay a waterproof film on flat and dry ground; fix dry keels (HXW>30mmX40mm) on the ground with expansion bolt to form the basis frame (joist systems). The distance between the keels should be less than 300 mm with 8-10 mm distance between keel and wall. Mortar is prohibited when fixing keels. Joist systems must be flat, clean, dry, structurally sound, free of squeaks and free of protruding fasteners. Attention: the film has to overlap minimum 200 mm.
1.2 After installing the frame, directly nail flooring boards into the frame. Leave 8-10 space to the wall and do not press the floors too tight. Using pneumatic driven nails or hand nails (screws) as fasteners. Space fasteners at 150mm (for 915mm length board) and 300mm (for1830mm length board) intervals from edge along the border. Areas with higher humidity may require additional nails. The nails are at a 45 to 50 degree angle to the tongue of existing flooring. 
1.3 If possible, for noise improvement and flooring performance, when laying bamboo flooring on the joists, adding an additional layer of 9-12 mm thickness plywood on the joists is recommended. Cut plywood to 1220x1220 mm sections and space sections 19 mm. Fastening for plywood are 1/8 in. (3.2mm) around perimeter and at every 150mm on bearing edges and every 300 mm along intermediate supports.
1.4 Leave an 8-10 mm distance between wall and floorings or subfloor to avoid distortion caused by heat expansion and drying shrinkage. 12 mm minimum expansion space at all vertical structures.

2 Floating-style installation (for soundproof flooring)
2.1 Lay dampproof mat on flat and dry ground before laying bamboo flooring boards.
2.2 Directly lay bamboo boards on the dampproof mat with double-faced adhesive tape for flooring. Glue boards with slight non-water-soluble glue. 
2.3 Leave 8-10mm space to the wall for heat expansion and drying shrinkage. 12 mm minimum expansion space at all vertical structures.
2.4 As the requirement for evenness and dryness of the ground is extremely high when choosing floating-style installation, so choose it seriously. The floating-style installation without basis frame is only used for soundproof and quakeproof flooring.

3 Installation notes
3.1 Make sure that the ground is flat and dry before installation. (See Minimum Acceptable Jobsite Condition)
3.2 The keels for the basis frame must be dry and structurally sound enough.
3.3 No water-soluble glue allowed in installation to avoid dampness and distortion.
3.4 Separate bathroom, kitchen and balcony from the flooring area to avoid water dampening. 
3.5 In order to avoid distortion, better not apply installation in wet season.
3.6 The cutting section of flooring boards should be coated with dampproof lacquer to avoid dampness.
3.7 Acclimation of the flooring must be completed with the temperature and humidity maintained at or near normal living conditions between 17 to 27¡æ (60-80¨H) and at the average yearly relative humidity for the area.
3.8 Although the color deviation is not so obvious in bamboo floors as in wooden floors, unpacking 4-5 cartons and putting the boards on the installation frame to distinguish and place those boards in color deviation in different areas randomly is recommended.
3.9 The bamboo floor can be used at least 24 hours later after complete installation.
3.10 Expansion space should be left around the perimeter. Typical expansion is equal to the thickness of product installed or in accordance with the mentioned above.

 Applications

 Waranty

Statement of warranty
EverJade Bamboo Flooring Warrants for a lifetime to the original purchaser its bamboo flooring to be free from defects in material and workmanship for residential use, 10 years for commercial application if the flooring has been installed in accordance with specification guidance and the installation instruction furnished for the product. This warranty covers the following:

Pre-Installation Warranty: Installer should inspect each EverJade Bamboo plank for quality, color and finish before installation. If not 100% satisfied, you just return the uncut plank to your dealer. EverJade will replace it at no cost (material only). EverJade and its distributor will not take responsibility for complain about any quality and color variation of EverJade Bamboo flooring after installation, except for the cases described in pre-finish and lifetime structural warranty.

Pre-Finish Warranty: EverJade Bamboo warrants that EverJade pre-finished surface of lacquer will not wear through under normal residential traffic condition for full 20 years(10 years for commercial use), from the date of original purchase. EverJade will replace any defective planks (material only) if pre-finished surface wear through in the warranty period.

Lifetime Structural Warranty: EverJade will replace an defective planks caused by separation of laminated boards, unsightly cupping of planks, bucking due to expansion and warping of boards at no cost (materials only) for as long as you own the home (commercial-10 year).

Caution: Bamboo flooring are manufactured in accordance with accepted industry standards, which permit defect tolerance, which should not exceed 5%. You accept the products as it is when you complete installation except for structure lamination problem, because Bamboo is a natural fiber, variations in color naturally occur. Each box should be inspected for difference in color and staggered throughout the flooring. 

Exclusions from Coverage: This warranty is valid only if the owner can provide an original proof of purchase and is the original owner of the flooring. EverJade bamboo flooring cannot guarantee abuse, pets, indentations, scratches, or insufficient protection on furniture, failure to follow all the manufacturer specific written installation instruction, improper maintenance, or improper alterations of original manufactured product. It is important to maintain a stable relative humidity rate between 40% and 45% in the home. 

Limitations: Unless otherwise precluded by the law in your state the above warranties are the complete warranties offered by EverJade and are in place of all other express and /or statutory warranties including the implied warranties of merchantability and fitness for a particular purpose and EverJade does not assume the liability for incidental or consequential damage.

                                                                                                             BE AT YOUR SERVICE!

Copyright © EverJade Flooring Products Group, All Rights Reserved
Yijia Jiayuan Zone, Tongzhou Xinhua Street, Beijing, China
Tel: +86-10-86563588   Fax: +86-10-86563588