Ceramic tile positioning tile spacer

Specifications

Specifications

lengthen and widen wall tile spacer 
1.wall tile spacer make the well -located 
2.Any sizes are available support open new mold 

Tile spacer

1.Material :Fresh material or recylce material(as customers' requirement)

2.Type :standard type and with handle type

3.Application:Made of PE Holds tile securely in place for quick and accurate installation Precision 

   molded, not   extruded, for strength and stability

4.Size :1.0,1.5,2.0,2.5,3.0,4.0,5.0,6.0,8.0 and 10.0mm

What you'll need;-

- Tile Spacers
- Tiles
- Adhesive
- Latex Gloves
- Notch Trowel
- Adhesive Spreader (Optional)
- Grout Float
- Hydro Cleaning Sponge
- Mixing Bucket (For mixing adhesive)

1.) Using a Bright Ideas Notch Trowel, apply a bed of adhesive over an approximate area equivalent to four tiles.

2.) Fix the first tile squarely into position and place a 1mm tile spacer at each corner.

3.) Using a twisting action position the next tile alongside the first tile and place a 1mm spacer at each of the corners.

4.) Repeat points 1 to 3 for all subsequent tiles applied.

5.) After all tiles have been applied to the surface, proceed to grout over all the tiles using a Bright Ideas Grout Float, making sure to leave spacers in their fixed positions.

6.) Allow the grout time to set before cleaning away any excess grout with a Bright Ideas Hydro Cleaning Sponge.