Rolling shutter door forming machine with good after sales-service

Specifications

Our company founded in 2000, mainly produces continuous roller type cold rolling forming equipment(roll forming equipment)', set design, production, sales, service' as one of the high-tech enterprises.

Cold bending equipment produced by our company have been widely used in the construction industry, household electrical appliances, door window machinery and other industries.  Our company accodring to user requirements design a variety of rolling machine and large fire rolling shutter unit, such as various roll forming machine.

For a long time, our company always adhere to the 'quality, credibility' business purpose, and constantly strive for excellence, to create products industry: adhering to the 'quality and production, to the credibility of development, let the user satisfaction' service concept, to provide for the customer product development, production, installation debugging unit, a full range of quality services, multi-level.

JF-801 Aluminum Rolling Shutter Forming Machine

Operating Instructions for Rolling Mill

1.Before starting the rolling mill, lubrticcate the gear, upper/lower pinch rollers, otherwise a damage might be caused due to the friction between the gear and rollers. Lubricate the rollers hourly, the gear every 8 hours and the deduction gear biannually during the machine operation for maintenance

2.Alignment of feeding: Before operationm, align and straighten materials with a suitable specification on the guide plate. if the rolled product drops out due to the deviation of materials, correct the feeding position on the feeding guide plate, swing it to both sides until the rolled product is proper, then secure the screw.

3.Adjustment of pinch roller: after startup of the rolling mill, push materials into the first group of pinch rollers, note whether the product meets position before securing the adjusting screw.

4.Straightening & leveling: if the product turns out curved or uneven, adjust it on the straightener by first straightening the lower pinch roller onto a parallel with the forming roller, then lowering the upper roller toward the power until the product can pass through, See whether the rolled material is parallel; if not, adjustthe straightening roller vertiacally to parallel; if there is any horizontal bending, rorrect this with the left/right screws at the exit of the straghtener.

5.Cutting machine: The positioning clamp of cutting machine, rolled product and set rule shall be placed straightly, correct and secure the set iron according to the length required.

Forming Products

 warranty:

1 year warranty, we also will supply technical and fittings after warranty

after-services:

if you come to our factory examine goods, we will teach  you how to control machine until completed control it

will send video for you in detail or any way you like

We also manufacturing Rolling shutter Side Motor

Company Event

Welcome to visit our factory and give me enquiry.

Thanks for taking time and attention