QBK Pneumatic Diaphragm Slurry Pump

Specifications

Summary:
  QBK pneumatic diaphragm pump is the third generation of pneumatic diaphragm pumps developed by our company. With a long service life and will not stop. It not only pumping the liquid flow, but also transfer some of the not easy flow medium. With self-priming pump, submersible pump , shield pump, slurry pump and impurity pump's advantages. Widely used in petroleum, chemical industry.

Parameter:

Capacity:0m3/h-60m3/h

Discharge:0-120mm
NPSHr:7m

Deliverylife: reachers 70m length
Outlet pressure: up to 6kg/cm2
Pass the max grain: up to 10mm

Material: PP,Aluminum,Carbon steel Stainless steel 304 316

Usage:
1) Chemical Industry
2) Petroleum
3) Electroplating industry
4) Photo industry
5) Electrical Appliances Industry
6) Metal Industry
7) Mining
8) Food Industry
9) Medical
10)Pollution control
11)Pharmacy

Advantage:
1) No need to irrigation water. Suction lift up to 5m. Head up to 70m. Outlet pressure ≥ 6bar.
2) The flow is spacious and good performance. The maximum allowed particle diameter up to 10mm. Pumping mud, impurities, little tear on the pump.
3) Head and flow through the valve opening stepless adjustment (pressure regulator between the 1 ~ 7bar)
4) The pump with no moving parts, no seals, diaphragm pumps to pumping of media with moving parts, the media completely separated from the workpiece, the transmission medium does not leak out. So pumping toxic, volatile or corrosive media, it will not cause environmental pollution and danger to personal safety.
5) Have no electricity. In flammable and explosive places are safe and reliable.
6) Can be immersed in media work.
7) Easy to use, reliable, open stop simply open and close the gas valve. Even though no longer the case as an accident or sudden stop running media will not result in damage to the pump. Once the overload, the pump will automatically shut down, with self-protection performance, when the load is back to normal, and can automatically start running.
8) Simple structure, less wearing parts,installation, maintenance, pumping will not come into contact with the medium valve, joint rod and other moving parts, unlike other types of pumps due to the rotor, piston, gear , leaves and other parts of the gradual decline in performance wear and tear.
9) Can transport more viscous liquid (viscosity of 10,000 cps or less);
10)No need oil lubrication, even in idle runing. Nor any effect on the pump, which is the most important feature of the pump.

Looking forward to your inquiry!

,

.