high reliable anti turbulence magnetical control turb shiled level switch

 0186-S series level switch instruction

Description

   Turb shield level switch 0186-S(see Figure 1) new designed,  for vertical mount float   switch, it is made of SUS304/316 , one of our  hot sell   products. with  turb shield protect ,suit for high temperature and steaming liquid,tank fill with flow liquid ,  It is robust construction anti corrosive ,can be  easily install and used, when mounted stemp up operating functions are reversed,safely and reliablely  to control the level of the liquid , it  has smaller volume than mechanical switches, and high speed, longer life, stronger anti-load impact to compared with the electronic switch. It without complex circuit ,won't be disturbed by electric ,and easy to use to control.

The stainless steel series float switch is designed specifically for liquid level sensing in demanding fluid level sensor applications. This durable stainless steel float switch is the perfect sensor for a wide range of liquids, from high purity to high temperature or high pressure corrosive liquids

Figure 1                                                                                  Figure 2

A: The components.

1: The main stem  material: SUS304

2. The float material: PP

3. Turb shield protect(stainless)

4. Assembly: Reed switch magnet ,Epoxy 

5. Lead Wire.30 cm(Teflon).

6. Cir-clip,stainless nut

B: Working principle:

The level  switch utilize the liquid buoyancy principle, along with the liquid pressure (water level) the duckbill float will move up and down ,the it will trigger the reed switch  that sealed in the the stainless stem ,the magnet arm will be 

affected, and  send the  connect (ON) or  disconnect (OFF) signal.

C:The installation instructions (see Figure II)

1.on the bottom or the ceiling of the tank,vertical mount, No( open) or NC (closed) due to the installation position.

2. The total length of 0186-S is 82 mm, the connect use the M10 stand thread,f diameter of the connector thread is 10 mm, length is 15mm ,height is 5mm ,hex stem length 23mm, 

3. Unscrew the nut ,via the hole at the bottom or at the ceiling , then tighten the nut.

D: Instructions

   1: The range of  temperature -30 ℃~ 135 ℃(high temperature 180℃ need to customized)

   2: Suit for corrosive liquid and other liquid , and the viscosity of the liquid is not high stick, won’t be dry.

  3. Parameter.

Another level switches series

High corrosive resistance teflon 1043-P level switch

Stainless level switch1045-S 

NBR oil level switch

E .Application:

 Sanitary level  switch that suit for a variety of food and beverage equipment ,medical equipment and industrial equipment,

such as household appliances, humidifiers, chillers, fog machine, constant temperature and humidity level detection machines, printing machines, medical equipment, beverage machinery, and pressure tank, the signal remote switch police, health, environmental, toxic, corrosive liquid with acid use.

About us

 Jinhefeng industrial electrical co., ltd is devoting to designs and manufacture the sensing switch for more than 10 years .we  have striven and now provides some of the best level switch solutions for liquid level, flow control , for the most demanding float switch applications. Whether you need a single point float switch or continuous liquid level sensor, JHF Company can direct you to the proper float switch and liquid level sensor solution. Our Company offers standard float switch sensors in stock for same day shipment, and can also custom configures multiple-point float level switches in only 5 days. 

  We can combine our wide range of sensing technologies with numerous material choices to fit almost any application. We have material choices such as stainless steel, Polypropylene,PVC , Teflon ,copper etc. to ensure that you are provided with a sensor that will provide durability and long life. 

  The float switches are stand up to harsh environments, hazardous locations and pressures,sanitary and food grade, that designs meet agency approvals like ROHS and ISO. 

  Whether you need a float switch, continuous liquid level sensor, pressure or temperature sensor, utilized in Water and Waste Water Tanks, Food and Food Processing Equipment, HVAC, Specialty Vehicles, Medical, Marine, Washing Equipment, or any Industrial Application, let JHF provide it.

 The float switch delivery cargo and the payment.

Q&A

: How soon can we get the level switch sample.
A : We have usually models (level switches) in stock,it can be sent to you within 1-2  working days.

       and  the order depend on how many pcs you need.let us discuss it.
2: What is the payment terms?
A :We can accept T/T and L/C at sight payment.
3: Can the logo or company name or the pattern to be printed on the level switch  or package?
A : Sure.Your logo or company name or pattern can be printed on your products or package by
printing,etching,or sticker,

4: Can we choose color of the product?
A : Yes,please discuss with us.
6: Can package be change?
A : We have professional designer that can help you to design beautiful product
package for your product.
7: Can you help us to develope our own product?
A : OEM project is welcome, we have professional workshop for doing OEM project.
8: How can you guarantee quality of your product?
A : Quality is our life!And the level sensor are stable and reliable. 
     For every product, we have passed more than one hundred time of inspection, because QC checking on each production process.
9: MOQ?
A :Usually for the special order (OEM) 100pcs is the least ,but for the usually products you can choose any piece,but we can also talk in detail.

professional level switch maker