American Type Worm Drive Stainless Steel Clamp KB16SS

More sizes are available .......

The worm-drive hose clamps are designed for a variety of applications,including automobile(air induction,radiator hose, heator hose connection,fuel filler connection,turbo charger,DPF,EGR etc),fire fighting, railway, home appliance, plumbing, agriculture, water management, marine, sanitary,food industry.Corrosion resistance varies with different material composition, which should be considerated in practical applications.

     American Type Worm Drive Stainless Steel Clamp

Standard packing: Inner is plastic bags, then in cartons, finally in pallets.

Accept customers'  special requirements!

    American Type Worm Drive Stainless Steel Clamp

Good Clamps But High Price ? ? ?

Low Price but Poor&inconsistent Quality ! ! !  

If you are facing the above problems,

Come to KING SEAL ! ! !

We can assure you:

Consistently High Quality Clamps with Resonable Price!

stainless steel hose clamps

1.Radiation Test; 2.Torsion Test; 3.Material Test; 4.Chemical components Test

5.Salt Spary Test; 6.Band Load and Tension Test; 7.Zinc-coating Thickness Test

1)    Worm Drive Hose Clamp: Most commonly used general-purpose clamp. The bands have clean punched rectangular perforations that hold strong and connect easily. American hose clamps can be used in non-circular objects.

2)    Non-perforated Hose Clamp: We have Welding Hose Clamp, Mechanical Hose Clamp,and High Performance Hose Clamp. Based on our popular general purpose worm Drive clamps. The non-perforated band keeps soft silicone hoses from shearing or extruding during installation, and providing a more stable and secures connection.

3)    Single Bolt Heavy Duty Hose Clamp: Highly resistant multiple use clamps for high pressures and significant clamping forces. The clamps are provided with three welding points and raised edges to increase their security, often used for irrigation, drains, pumping sludge etc.

4)    Double Bolts Double Bands Hose Clamp: Suitable for applications with very powerful clamping requirements. The solid band is provided with raised edges. Often used in the transportation of pulverulent, concrete, sand and cement.

5)    T-Bolt Clamp: K-Seal T-Bolt clamps are designed to provide connections without leaks. Band edges are rounded to protect the hose. It’s manufactured to the highest quality standards. This high strength clamp is often used for industrial, marine and vehicle.

6)    Spring-loaded T-Bolt Hose Clamp: Designed to compensate for the expansion and contraction of hose caused by temperature and/or hose cold flow. Typical installations include silicone hoses on charge air cooling/air to air, after cooling systems, and primary engine coolant systems.

7)    Ear/Seamless/Pinch Clamps: Easy to install in narrow spaces with normal pliers and provide a uniform, tamper proof seal. They are widely used on both soft hose and rigid plastic pipe.

8)    Rubber Lined Retaining Hose Clamp: Ideal for vibration damping and insulation support - for wire, pipe & hose. The rubber profile is in EPDM material.

9)    Spring Hose Clamp/Clip: Self-compensating hose clamp. Expands/Contracts with hose in response to temperature shifts. Cannot be over/under tightened. Less time for assembly. Can be reused. Used in Cooling &Heating System, hydraulic etc.

10) Double Wire Hose Clamp/Clip: Providing for the clamping of annulated and polyethylene hoses in the area of maintenance, irrigation, ventilation etc.

    American Type Worm Drive Stainless Steel Clamp