Diatomaceous mud wall paint,non formaldehyde and odorless,100% eco-friendly

Product name:Diatomite wall paint,1026 colors are available

Model: Meter Sunshine(MET-S)

Using pure natural deep-sea diatom, imported nanomaterials, natural inorganic silicon and other environmental raw materials, adding natural negative ions and photocatalysts,which make metope continue decompose the hazardous gas such as formaldehyde, benzene, ammonia and VOCs via the action of light. remove the household odor effectively , antibacterial, purify indoor air, keep you and your family's health.

APPLICATION SCOPE: schools, high-end villas, dwellings ,star hotels, hospitals, commercial,recreational and entertainment centers, office buildings etc.

CONSTRUCTION METHOD:  roll coating ,spraying  

THEORY OF CONSUMPTION  (30 micrometers DFT):

25-45 square meters/barrel, The actual floor space under construction may be different due to different dilution ratio, construction methods, wall roughness, construction technology and construction environment.

FUNCTIONS:

1. Releasing negative anion: Sustained release negative ions that are beneficial to human body, so that the content of indoor anions can reach the standard content of anions in the ecological prairie.

2. Respiratory humidifying: The product can regulate the humidity of indoor air and improve the indoor air quality effectively. Especially have effective modulation effect on coastal and plum rains areas.

3. Antifungus and antibacterial: The product can prevent the walls go moldy, The inhibitory rate of  Staphylococcus aureus & Escherichia coli could be more than 90%.

4. Purifying air: The purifying rate of the indoor hazardous gas such as formaldehyde, benzene, ammonia and VOCs could be more than 90%.

5. Photocatalytic decomposition : By adopting the most advanced catalyst technology, adding nano titanium dioxide as the catalyst for the photocatalytic reaction, sustainable and efficient decomposition the  substances in the air, which are harmful to the human body, also the products could keep the air clean.

The construction steps

1,Underlying Treatment     

For Newly-built Wall:You have to remove the surface dusts and loose marl, gap repair timely, ensure that the wall is neat, dry , smooth and flat then polish the wall(PRO-C material series),clean the wall with water . Roll coating with GOL-S(strengthen the adhesion between bottom layer materials and the surface layer materials effectively)

For Pre-painted Wall:Eradicate the loose film on old walls, clear the surface dust and impurities, grind, clean and thorough dry the wall. polish the wall(PRO-C material series),clean the wall with water . Roll coating with GOL-S(strengthen the adhesion between bottom layer materials and the surface layer materials effectively)

2. Surface construction

Dilution:  dilute with pure water, about 5%-20%,

According to actual construction process requirement to add water to dilute in order to achieve the best coating effect ,stir well before use, filter it even the better .clean the wall and dry it thoroughly, ensure the surface moisture ≤10%, PH<10,Pre-coated substrate surface must be firm, dry, clean, smooth and non-loose,color with Meter Sunshine then start to spraying or coating.

Paint system and Coating times

Paint system: Underlying

Coating times :Blue Shield(PRO-C) twice, Golden Shield(GOL-S) once

Paint system: Surface

Coating times:Meter Sunshine roll coating or spraying twice to third times

DRYING TIME (AT 25℃)

dry to touch:4h 

dry through:8h

recoating: At least 8 hours interval(fully concretionary,2 days in summer,4 days in winter , appropriate extension the recoating time in wet weather )

Construction conditions:

Please don't get the cases of construction in wet or cold weather (temperature below 5℃, the relative humidity is greater than 85%), otherwise it can not achieve the desired effect of the painting.

MAINTENANCE TIME: Seven days at 25℃. In case of humid whether or the temperature is too low, the time shall be appropriately prolonged to get the best effect.

CLEAN:During the pause of the coating or after the coating is complete, please promptly clean all utensils with clear water.

STORAGE:

The product shall be stored in a shady, cool, dry, and airy place at 5-35℃. The product shall be kept airtight for storage after the can is opened.

CAUTIONS:

In Order To Obtain Reliable And Satisfactory Effect,Be Sure To Read The Method Statements On Our Product Packaging And Labeling Carefully Before Use.

Open All The Windows And Doors Before Operation, Achieve Better Ventilation Conditions.

Safety devices Must Be Worn. Especially If Your Skin Is Easy-atopic. Avoid Contact With Eyes. In Case Of Contact With Eyes, Rinse Immediately With Plenty Of Water And consult with medical personnel.

Keep Out of Reach Of Children Or Pets. The Product Should Be Stored Beyond Their Reach. In Case Of Contact With Them, Rinse Immediately With Plenty Of Water And consult with medical personnel.

Please Separate, Cover And Shelter Wooden Products And The Wall Region Effectively, In Order To Maintain Construction Site Clean, And Ensure The Best Coating Results. To Avoid Confusion In The Construction Operation, Please Apply Latex Only After Wood Paint Is Dry. Avoid confusion construction operation.

ENVIRONMENTAL PROTECTION REGULATIONS:

There is no any harmful heavy metal substance in the product. It conforms to the latest national standard of the limit of harmful substances in inside wall paints and China’s technical requirements of environmental products.

EXECUTIVE STANDARDS:  GB/T9756-2009    GB18582-2008

SHELF LIFE:The valid shelf life is 12 months. See the label for the production date.

100% eco-friendly diatomaceous mud wall paint,non formaldehyde and odorless

Factory tour- Cosmi is one of the biggest factories in paint industry

Cosmi teams - We have a strong and professional service teams,to provide best product,top service

is what we