fatty acid flaking equipment

Specifications

The fatty acid ester flaking machine is formed with stand, motor, reducer, cooling cylinder (jacketed), scraper, thickness adjustor, feeding hopper, discharging hopper, stainless steel dustproof cover etc. The parts in contact with raw material is SUS304, the stand is hot galvanized carbon steel. The contact between jacket and outside cylinder, scraper and cylinder should be uniformed. The contact line should be not less than 80% of whole length. There should be no bumping and abnormal noise during trial running. The outside cylinder will be polished after complete the machining.

1.    Output: 1000kg/h

2.    Cylinder: 1200×1500×12mm (material: 304 stainless steel, stand: carbon steel

3.    Scraper: Made of bakelite

4.    Feeding hopper: 1400x1000x200x4mm, there is heating coil 32×3mm. feeding area is DN32, discharging area is DN40, overfloating hole is DN50. The material is stainless steel 304.

5.    Thickness adjustor: with steam heating (material: stainless steel 304)

6.    Dustproof cover: 1.5mm (material: stainless steel 304)

7.    Power: 11kw (frequency conversion)

8.    Cooling water inlet and outlet: standard copper revolving connection

9.    Weight: about 2300kg