SBS waterproofing membrane Production Units for middle east asia

in pallet

Specifications

The whole SBS ROLL ASSEMBLY LINE contain 20 parts. As follow:
1.1 Open bookviews devices
This is two positions device which use cylinder to support the reinforcement
1.2 Intermediate feed device
1.3 Reinforcement connecting device
By means of double sides pressing board, the device press the material on one side, daubs chemical glue on the material'sotherside, which makes the materials mixed together automatically and reduces the defective goods rate because of reinforcement joints to the greatest extent
1.4 Reinforcement drying device
No need to stop the operation while reinforcement jointing it, releases and dry reinforcement automatically.

1.5 Auto rectifying device
1.6 Impregnation tension control device
Extrusion by cylinder, asphalt coating roll impregnation can be adjusted up-down. It adopts unique reinforcement tension control
1.7 Asphalt coating device
Coating asphalt twice can adjust the position of reinforcement in the coiled material, meanwhile it ensure its workability. The independent asphalt coating roller can regulate up and down by electronic. with the control of accurate electronic device, it can master the exact thickness of coiled material. During each class production, the rest materials can be reused. The flue gas environmental protection system of preimpregnated asphalt coating adopt closed overall frame form which use the method of ejecting smoke in petticoat pipe and absorbing smoke outside
1.8 Sand-scattering device
This set of device adopts the technology of automatic tracking and rectifying sanding, which reduces the waste of sand to the greatest extent.

1.9 Sand lifting device
1.10 Filming and thickness-measuring device
Through this device, we can regulate the positions of the coiled material and the membrane optionally, which reduce the defective goods, and the powe-driven lifting technology can save manpower
1.11 Sand-pressing with suspending cooling device
This device extended 10-15 meters which speed up the cooling to a certain extent. Advanced thickness measurement device detects the products quality to ensure the thickness of the stability
1.12 Cooling embossing device
1.13 Finished products storage device
1.14 Traction-Spring devices
Minimize membrane tension on the winder, assist to storage product and auto winder using effects.

1.15 Auto winder device
Inverter computer programming and touch screen synchronization control method realized conveying felt, ounting, cutting felt, gluing tape, propelling felt and rolling automation.
1.16 Electrical operationg control devices
1.17 Mixing-weighing system devices
Cutting type mixing blades ensure the raw material solubility and avoid coking of tank wall. Emptying from the tank's taper bottom makes the raw materials discharged completely. Electronic digital display weighing guarantee the accuracy of the mixture ratio. The rational distribution of linepipe, gel and granding oil pump for the operating deck. Make practicability more reasonable. Flue gas treatment technology: Filtrate strive first and oil fume then to ensure the flue unimpeded via dismountable and washable filter.

1.18 Horizontal storage tanks
1.19 Powder-converying system
The process flows are as following: First, with PLC control, storage tank delivery material to charger through pneumatic valve. Next supply the material to gauging tank from spiral conveyer. Third, it shows the needed material quantity by electronic balance, and carries the material to spiral conveyer pass sealed feeders. At last, feed the material to each agitator tank by PCL controlling. If you need to choose several working process, then directly select the agitator tank which you need on PCL control panel
1.20 Smoke purification device
Using spray of welcome method, dust gauze, active carbon adsorptive process and demister to dispose the smoke. Then attainning the environmental standardization, Lowcost, effective. Saving more factory space.