18 channels ABS Pigtailed Module Simplex CWDM OADM East or West

WDM Optical Network
Wavelength Division Multiplexing (WDM) is a technology which multiplexes a number of optical carrier signals onto a single optical fiber by using different wavelengths (i.e., colors) of laser light. This technique enables bidirectional communications over one strand of fiber, as well as multiplication of capacity. Powerlink, backed by China factories, supplies a complete series of WDM Optical Network Solutions, such as multiplexers, splitters, amplifiers, attenuators, transceivers and other active or passive optical components. We provide the best products to help build and expand fiber optic networks. Customers can buy these products directly from categories below or Make Customized Orders.
WDM optical networks need multiplexer (MUX) and demultiplexer (DEMUX) to combine and split the multi-wavelength optical signals. The MUX is used to join signals together at the transmitter, while the DEMUX) is used to split signals apart at the receiver. CWDM networks use CWDM modules such as CWDM MUX/DEMUX and CWDM OADM. DWDM networks use DWDM modules such as DWDM MUX/DEMUX and DWDM OADM. Powerlink provides a series of WDM modules which enable the expansion of existing fiber capacity. Our CWDM DWDM OADM modules are available with three packagings: ABS Pigtail Module, Rack Chassis and LGX Cassette.

CWDM MUX DEMUX
Coarse Wavelength Division Multiplexing (CWDM) networks need multiplexer/demultiplexer (MUX/DEMUX) modules to combine and split the multi-wavelength optical signals. These modules are generally called CWDM MUX/DEMUX. Coupled with highly reliable passive optics (e.g., CWDM SFP/SFP+), CWDM MUX/DEMUX modlues let operators make full use of available fiber bandwidth in local loop and enterprise architectures. Powerlink provides a series of CWDM MUX/DEMUX modules with as more as 18 channels (20nm spaced) in simplex or duplex configurations. All the CWDM modules are available with three types of packaging: ABS Pigtailed Box, Rack Chassis and LGX Cassette.

Simplex CWDM OADM for East or West Traffic
The Simplex CWDM/AD modules add (multiplex) and drop (demultiplex) selected wavelengths over single fiber Simplex CWDM MUX or DEMUX link for East or West Traffic.

Powerlink CWDM OADM ( CWDM/AD) modules are Course Wave Division Multiplexing (CWDM) Optical Add and Drop Multiplexers (OADM). "Add" and "drop" here refer to the capability of the device to add one or more new wavelength channels to an existing multi-wavelength WDM signal, and to drop (remove) one or more channels, passing those signals to another network path.

The CWDM/AD is a passive optical add/drop multiplexer designed for point-to-point, ring, or bus configurations' applications that provides the ideal solution for the increasing bandwidth demand on enterprise and metro access networks and delivers dramatic cost savings to network equipment manufacturers, enabling them to develop metro access systems that are lower in cost, easier to provision and simpler to operate.

Added/dropped channels are interfaced to any of Powerlink CWDM transceivers on the equipment side, and we also provide optional port configurations such as: Express Port, Monitor Port, 1310nm passband port and 1550nm port for these multiplexers according to customer choice.
Front Panel Details
Powerlink CWDM-OADM-Simplex-Direction-ABS-rackmount-Front-Panel-Details-OADM09.jpg
Wavegate front panel detaild example
A
Common port:
Trunk input and output in west and east traffic.
LC, SC, ST and FC connectors available.
B
Add/Drop port for specific wavelength:
Add and Drop on west or east.
LC, SC, ST and FC connectors available .
Compliant to ITU-T G.657A1 CWDM standard from 1270nm to 1610nm, with 20nm increase.

NOTE:
Actual layout depends on the chosen connector type as well as other factors. However, the principal scheme stays the same
We also provide optional port configurations such as Monitor Port for these multiplexers according to customer choice, need more details, please contact at us

Item Details
16 channel CWDM OADM
1 x Common ports for West or East traffic: Simplex Connector
All Add/Drop Channels for West or East traffic: Simplex Connector; Channel separation 20nm from 1270nm to 1610nm
1 x ABS pigtailed housing
OADM complement to the express CWDM product line
Compliant to ITU-T G.657A1 CWDM standard
Protocol and rate transparent for applications up to 10Gbp
Low-cost transceivers applicable, existing equipment can still be used
It is equipped with configuration ports like Monitor, Express port according to customer choice (see options)
Front panel is equipped with adapters according to customer choice (see options)
ISO 9001 manufacturing facility