Ultrasonic Thickness Gauge UM-1D, thickness meter, thickness tester, cheap price, CE certificate,

Specifications

Ultrasonic Thickness Gauge UM-1D

Ultrasonic thickness gauge is used for measuring thickness and corrosion of pressure vessels, chemical equipment, boilers, oil storage tanks, etc. In industries of petroleum, shipbuilding, power station, and machine manufacturing.

Standard package:

UM-1 thickness gauge

Standard probe (PT-08)

Carrying case

Two 1.5V AA alkaline batteries

Couplant

Operating manual

Certification of quality

Packaging list

Operating principle:

Ultrasonic pulse/echo method with dual-element probes

Probe zero adjustment:

Selectable: 1-point calibration: normal measurement

          2-point calibration: curve surface measurement or other special application with a high precision

V-path correction:

Automatic

Measuring range:

0.8mm to 300mm; 0.031in to 11.81in

Depending on probe, material and surface condition

Digital resolution:

0.001in or 0.1mm

Units:

Selectable: inch or mm

Display:

128×64 dot-matrix LCD screen (1.65in×2.24in; 42mm×57mm)

EL backlight and switchable contract ratio

Digit height: 0.54in or 13.75mm

Measurement update rate:

4 Hz in standard measurement mode

25 Hz in MIN capture mode

Material velocity range:

1000 to 9999 m/s; 0.039 to 0.394 inch/µs

Power:

Two 1.5V AA alkaline batteries

Warning with low battery voltage

Operating time:

Up to 200 hours (without backlight) with alkaline batteries, depending on operating mode

Auto shut-off:

After 5 minutes of non-use

Operating temperature:

-10C to +50C; +14F to +122F

Specification to -20C/-4F on request

Size:

5.86in×2.87in×1.25in; 149mm×73mm×32mm (H×W×D)

Weight:

200g / 0.44lb (including batteries)

Data logger capacity:

Up to 500 readings can be divided into a maximum of 5 files (user-selectable)

Optional accessories:

Attachable rubber case

Numerous special probes on request

Couplants and high-temperature couplant

4-step/6-step block for calibration

Data transmission cable

Application software

Operating language:

English and Chinese

Measuring error:

Up to 1in: +/-0.002in or +/-0.1mm

Above 1in: +/- 1%H

H is the height of the testing object

Repeatability:

+/-0.001in or +/-0.1mm

Application software:

UMVIEW

Interfaces:

Serial RS 232C port in combination with a communicative cable;

Data transfer parameters: 8 bits, 1 stop bit, 9600 baud, no parity.