NEW BTH06 USB HIGH ACCURACY TEMPERATURE DATA LOGGER TEMPERATURE PROBE OUTSIDE

 NEW BTH06 USB HIGH ACCURACY TEMPERATURE DATA LOGGER TEMPERATURE PROBE OUTSIDE

BTH06 INTRODUCTION

This data logger with external probe measures and stores up to 32,000 temperature(-35 to 80℃(-31~176℉)) readings. Some professional applications can be provided by the PC software DGraph. Logger status, alarm indication and low battery indication are via flashing red/green LED and yellow LED. The button on housing can be used to start logging, or confirm and clear LED alarm when LED alarm is hold status.

User can plug data logger straight into PC’s USB port without any cables. Before getting started, user need to install USB driver and DGraph software, provided on the CD which is included in product packing box. All the software can run under Windows XP, Vista, 7 or 8(32 bit and 64 bit Versions). User can easily use DGraph software to setup sample rate(from 10 seconds to 12 hours), high/low alarm limit and start/stop method , and download data to PC, etc. And then user can view, analyse and print the data, or export other file formats(txt, xsl, csv, bmp, jpg).

Especially, for some professional applications, user can set access password, name each channel, enable/disable specified channel, input calibration data for each channel, disable LED indication for saving power, and select sample mode(Instant, Average, Maximum and Minimum), etc.

APPLICATIONS

This data logger is used mainly to monitor and verify temperature-sensitive goods, equipment or areas. Example:
Cold Chain    Refrigeration   Transportations   HVAC   Food&Pharmaceutical  Warehouse

FEATURES

External temperature probe, the length of 2m(or customized)

Portable, precise, compact and low cost

USB interface directly communicate with PC for setup and data download

Unique and uniform PC control software: DGraph

Each unit has single serial number

User can set access password fo each data logger

Alarm and status indication via LED

Start logging method: Immediately, Button, Start at

Replaceable lithium battery and data is not lost if exhausted

Two point calibration for each channel

Start logging method: Immediately, Button, Start at

Replaceable lithium battery and data is not lost if exhausted
Alarm and status indication via LED

Alarm limit settings for all channels

User can customize compound graph

User can customize new unit easily

User can name each channel and enable/disable it

SPECIFICATIONS

Measurement Range: -40 to 125℃(-40 to 257℉)

Accuracy(Typ.):±0.5℃(±0. 9℉)

Resolution(Typ.): 0.1℃(0.2℉)

Memory Capacity: 64KBytes(Total 32,000 readings)

Sample Rate: User selectable from once every 2 seconds to once every 12 hours

PC Software: DGraph software and USB driver required (Included in CD)

Power Supply: User replaceable 1/2AA 3.6V lithium battery, 1200mAh

Battery Life: Approx. 3 Years @ 1 Minute Sample Rate

Dimensions: 120mm×37mm×23mm(4.8"×1.5"×0.9")

Case Material and Weight: ABS; Approx. 80 grams(2.82 oz)