Henan Better dry mixing plaster manufacturing equipment

ANY QUESTIONS,BETTER CALL BETTER!!!

Sealed storage system

1) sealed silo in dry mortar production line
Silo device configuration can be set according to the same specifications or more different sizes, usually by silo welded steel.
Feeding into the silo, you can use the pipe pneumatic conveying or bucket elevator conveyor, screw conveyor can also be used. From the silo feed conveyor to the mixer commonly used pneumatic conveying pipe and screw conveyor transport.
In order to prevent the material inside the silo, arch plug silo usually has different forms of broken arch device to ensure continuous feed; in order to detect within a variety of settings in the warehouse material level indicator ; In order to eliminate dust pollution, use of warehouse roof precipitator for dust removal.
2) flotation-type discharge system
Nesting material type flotation system installed by a uniform floating silo cone at the bottom of the sheet constituted by compressed air so that the floating of the sheet material layer is formed on the surface of the suspension, the free falling in gravity flow smoothly, this effective warehouse nesting methods suitable for almost all the fine powder materials.
3) discharge screw conveyor system
Spiral discharging system is controlled by rotating helical screw conveyor blades, stop, to control cement (fly ash) material. Screw conveyor is characterized by a large transmission angle, and strong delivery capabilities, dust-proof, moisture-proof performance. To increase transmission capacity, the use of variable vanes in the form of a screw conveyor, filling amount in the feed section, the pitch becomes larger as the filling amount is reduced, which can effectively prevent backflow of high fluidity at the time of transporting the powder material.