a4 a3 Paper Cutting Machine in China

Paper Width

:

Gross width 1060mm, net width 1050mm

Cutting numbers

:

5 cutting-A4 210mm (width)  

Paper roll’s diameter

:

Max.1500mm.  Min.600mm

Paper core’s diameter

:

3”(76.2mm)or 6”(152.4mm) or according to the clients’ demand

Packing Paper grade

:

High-grade copy paper; High-grade office paper; High grade Free Wood paper etc.

Paper weight

:

60-100g/m2

Sheet length

:

297mm ( specially design for A4 paper, the cutting length is 297mm)

Ream amount

:

500 sheets Max. Height: 45-55mm

Production speed

:

Max 0-200m/min(depends on different paper quality)

Max. Numbers of cutting

:

673/min

Output of the ream

:

34reams/min

Load of cutting

:

500g/m2 (5×100g/m2)

Cutting accuracy

:

±0.2mm

Cutting condition

:

No variation of the speed, no break, cut all the paper at one time and need the eligible paper.

Main power supply

:

3*380V /50HZ

Voltage

:

220V AC /24V DC

Power

:

34KW

Air consumption

:

300NL/min

Air pressure

:

6 bar

Edge cutting

:

2×10mm

Safety standard   

:

Design according the safety standard of China

1) Machine Type  

Each machine table can take 2 sets of shaftless paper rack.

2) Diameter of the paper roll

Max. 1500mm

3) Width of the paper roll  

Max. 1060mm

4) Paper rack’s material  

Steel

5) Clutch device

Pneumatic Braker and control

6) Clip arm’s adjustment

Manual adjust by oil pressure

7) Paper core demanding

3”(76.2mm)or 6”(152.4mm) or according to the client’s need

1) Upper and lower knives are rotary make the cutting accuracy is

very precision.

2) Anti-curve device Include one set of square bar and steel

wheel. When the curve paper through paper edge unit that can

adjust the paper square and let it flat.

3)  6 sets slitting knives

Upper slitting knife take by air pressure and spring. Lower knife connect with bear drive(the diameter is 180mm ) and move with spring. The upper and lower round knife is made by SKH.The lower slitting knife (diameter is 200mm) and drive with in-phase belts. The lower slitting knife is 6 groups, each group have two knife edge. 

1) Transporting by level and overlapping device

2) High speed transporting belt and press wheel. Upper and lower

transport belt corresponding pressure paper, automatic tension and

close system.

3) Static removal device(Include static removal bar and Negative  ion generator)

Upper knife         

:

2 sets 1310mm Material: compounding  of tungsten steel

Lower knife   

:

2 sets  1310mm Material: compounding  of tungsten steel

Upper slitting knife

:

6sets  180mm  Material: SKH

Lower slitting knife

:

6 sets  200mm  Material: SKH