GPRS protocol gsm central monitoring alarm with UPS

Specifications

GPRS protocol gsm central monitoring alarm with UPS

Alarm host functions:

1.transmit alarm events to platform by GPRS channel

2.support fixed time interval hearbeat detection with platform

3.power DC 12V wired alarm accessories

4.shake hand with platform to correct time

5.has 8 wired zone and 99 wireless zones

6.set 6 alarm telephone numbers

8.auto dial preset GSM/TEL numbers after sensor triggered

9.support fixed time auto arm/distam functions

patible with SSG protocol,CONTACT ID protocol

11.entry delay/exit delay functions

12.set dialing times for alarm numbers

13.set siren sounding time

14.upload arm/disarm message to platform for free

15.Platform can arm/disarm alarm host reversely

16.excellent lightning protection function

17.low-power/AC power cut detection functions

18.user-friendly and DIY installation

19.can connect wired warning board

20.support roller shutter sensor close auto arm function

21.with 485 module for you to make bus system alarm

22.can add relay to start lights after alarm happens

23.can work with horn siren with auto playing recorded voice message function to increase deterrence

24.support uninterrupted power supply(UPS) to make system work continuously

How it works: Iron box alarm host will send alarm information to platform servers by GPRS after sensor triggered,then the servers will forward them to platform video wall and pop up to show alarm details.