New wireless outdoor siren with flash Built-in a piercing 110dB siren

Specifications

New wireless outdoor siren with flash Built-in a piercing 110dB siren

Main Features:

1.Easy to install and operate,With compact design and great peoformence

2.Built-in a piercing 110dB siren

3.Three working modes switch automatically :Alarm,siren and LED light.
Alarm mode:It will flash and sound after receiving an alarm signal from sensor;it can be armed and disarmed by remote control.
Siren mode:It will flash and sound after receiving the "on" instruction from alarm control panel.
LED light:LED light will be on after pressing a button on the remote control

4.Leaning code technology,easy to enroll sensors.

5.AC power with rechargeable lithium battery backup (included).

6.Working range can up to 100m.

7.30s Exit delay arming feature.

How to use it?

1.Turn on/off the siren:plug it into 110V/220V AC power,it will turn on immediately.
long press the switch button for 6s,LED indictor blacks out which means the siren is off.

2.Add/delete sensors
Add:short press connection button,setting indicator will quick flash,then trigger remote control or alarm accessories to connect them with the siren.
Delete:long press connection button for 6s to clear all the accessories.

3.10 wireless zones,zone1-zone11,Zone 6 is home mode zone,Zone 10 is delay arm zone,Zone 11 is 24 hour monitoring zone

4.Disarm the siren:press disarm,siren LED indicator will long flash one second,no beep sound.

5.Arm the siren:press arm,siren will make one beep sound indication.

6.Emergency alarm:in case of emergency,press SOS to start siren immediately.

7.Home mode:Press home mode ,siren will make one beep sound indication.

8.Start LED light:press home mode button two times,then LED light will be on.

9.Press switch button and connection button simultaneously can stop siren sounding.