Automatic waist high entry access retractable flap barrier gate

Specifications

Automatic security waist high electric retractable flap turnstile gate

parameters: 

voltage:AC220±10% V,50HZ;

continuous current:24V/100W;

working temperature:-30°C~+70°C;

relative humidity ≤90%,non-condensing;

input interface:12V level signal or pulse width >100ms 12Vpulse signal

driving electric current>200mA;

communication interface:RS485;

communication distance:≤1200m;

maximum width :600mm;

passing speed:≤40 people / minute;

time of gate opening or closing:1.5s(adjustable);

types:bridge-like bevel angle standard wing gate(one pair);

structure:frame structure/standard stainless steel outer skin;

overall dimension:L1200×w280×h990(mm);

weight:70KG;

beam turning direction:bi-directional passing or single way passing

work environment:indoor, outdoor;

Functions and Features:

1. Problem-self-checking function.

2. Many options of working ways: bi-direction card reading; one direction card reading and another no reading; one direction card reading and another freely. And single direction photocell controlled passing and close. Flap barrier's working way can be set in the control panel.

3. When power off, arm open automatically and power on again, arm will be held automatically.

4. When valid card read and passenger passed, arm can be delayed to close from 1-60s which can be set in the control panel.

5. Auto-reposition function: After card read, passenger not pass within regulated time period, flap barrier will cancel this passing right. And the regulated time period for passing can be set by managers.

6. If passenger pass without card read or valid card read, flap barrier will alarm until passenger get back from the barrier and then take a valid card to be read for passing.

7. Flap barrier is with 485 interface for long-distance control concern.

8. Anti-rush function: if there is no open single, arm will be holding tightly.

9. Double anti-clipping function: photocell anti-clipping and mechanical anti-clipping.When passenger is going through the flap barrier, photocell will detect out this situation and will not close. After passenger passed,arm will close automatically. During its reposition, if arm meets any obstacle, arm will get back automatically or stop working for a while with very slight force. Also it will alarm.

10. Flap barrier is with standard electrical interface for the integration of various readers and writers.

11. Flap barrier can count how many passengers have passed and will show it in the LED display.

12. Direction display to guide passenger which direction is to go.

13. Card-reading with memory or without memory function.

14. Flap barrier gate can control the population inside in the control of software.

15. Stable running with little noise.

Application:

Variety: