esd cleanroom clear tape cleanroom compatiable

ESD tape is an indispensable products in electronic industry,it's recommened to use in the clean room and ESD function required places.It's with high viscosity,reliable antistatic function,easy tear off and with only a little adhesive residual.

ESD tape is divided into antistatic tape,conductive tape,warning tape,Kapton tape.Most of them are widely used for electronical insulation on transformer,coils,motor,PCB masking and so on.Those tapes are all best to be used in cleanroom and EPA,but the warning tape don't has antistatic function but it's ESD mark plays a cautionary role for ESD area and static sensitive devices.

Kapton tape is a antistatic tape with heat-resistance function,the adhesive material is easy to shear and stamp without scratching phenomenon.It is used as an electronic protection tape for SMT temperature protection,electronic switch,PCB board,electronic transformer,electrical relay and other products demanding heat and moisture privision.

ES19201 ESD color tape
Material:polyester
Thickness:0.045-0.06mm
Surface resistance:10^6-10^8 Ohm
Suitable for PCB,motherboardm comunication electronics products
Speciality:its special anti-static process can effectively reduce the creation of the static in the process of producing tape and can be very good to prevent the static electricity hazard
Sizes and thickness can be made as requested.

ES19202 ESD tape
Material:PE
Surface resistance:10^6~10^8 Ohm
Voltage:<50V
Feature:plastic/paper core can be choosed,high adhesive but freely tear down without residue.
Suitable for cleanroom and EPA

ES19203 Warning tape
Material:PVC
Length:a.4.8CM*23M;b.5CM*33M;c.4.5CM*18M
Color:yellow
Used in SMT industry and other EPA environment

ES19024 Kapton tape
Material:polymide
Thickness:0.055+/-0.005mm
Size:width(0.5-1200)mmx33m
Insulation strength:4000V
Heat-resistant:280 C
Features:Anti-static,heat-resistant,easy tear off
Widely used for electronical insulation on transformer coils,motor,PCB,masking and so on,

ES19205 Conductive grid tape
Material:PE
Length:36M/50M
Voltage:<50V
Surface resistance:10^5~10^8 Ohm
Features:effectively discharge static to block the damage from static and electromagnetic wave
Customized width

esd cleanroom clear tape

ESD clear tape/anti-static tape
Size: 2"/3"/5" x 36/45m
Customized size available