Ceramic Pin Gauge set

Specifications

Our product lines include English and Metric plug gages and pin gages, plug gage and pin gage sets in steel , carbide , ceramic, special pin gauge  as well as ring gages, trilock gages and taperlock ...

  Ceramic Pin Gauge
  Superior abrasion resistance prolongs service life.
  Because ceramic pin gauge are free from corrosion , they can be handled with bare hands   do not require special maintenance or rust prevention treatment
  Similar coefficient of thermal expansion to steel , it can be used for measuring steel parts
  The nominal sizes printed in black are clearly seen against the white surface
  Diameters range from 0.2mm to 20mm with the smallest interval of 0.01mm , Lengh: 30mm or 50mm.

Model(minus)   Model(plus)          Range      No. of gages

   GP-M0M       GP-M0P          0.011" to 0.060"         50

   GP-M1M       GP-M1P          0.061" to 0.250"        190

   GP-M2M       GP-M2P          0.251" to 0.500"        250

   GP-M3M       GP-M3P          0.501" to 0.625"        125

   GP-M4M       GP-M4P          0.626" to 0.750"        125

   GP-M5M       GP-M0P          0.751" to 0.832"         82

   GP-M6M       GP-M1P          0.833" to 0.916"         84

   GP-M7M       GP-M2P          0.917" to 1.000"         84

*when you order  pins gauge set,just tell us size,Minus or plus.

Plain Plug Gages Library Series

Model(plus)      Model(minus)          Range      No. of gages

                      INCH LIBRARY SERIES

GPS-M1-2p       GPS-M1-2M       0.061"to.500"        440

GPS-M1-4p       GPS-M1-4M       0.061"to.750"        690

GPS-M1-7p       GPS-M1-7M       0.061"to1.000"      940

Plain Plug Gages DIN 2269

Features:
*Go(Plus) or No-Go(Minus)

* zirconia ceramics : 88~90HRC

*Accuracy :  ±0.002mm, ±0.001mm or±0.0005mm

*50mm Long

Uses:

*Checking locations

* Measuring hole sizes and depths

* Go and No-Go gauging

*Setting micrometers.

* Checking distances between holes.

Model No.  Range        Step   No. of gages  Model No.  Range        Step   No. of gages 

GM-00    0.30-1.00mm   0.01mm      71           GM-12   4.02-6.00mm    0.02mm     100

GM-01    1.01-2.00mm   0.01mm     100          GM-13   6.02-8.00mm    0.02mm     100

GM-02    2.01-3.00mm   0.01mm     100          GM-14   8.02-10.00mm  0.02mm     100

GM-03    3.01-4.00mm   0.01mm     100          GM-15   1.02-3.00mm    0.02mm     100

GM-04    4.01-5.00mm   0.01mm     100          GM-16   3.02-5.00mm    0.02mm     100

GM-05    5.01-6.00mm   0.01mm     100          GM-17   5.02-7.00mm    0.02mm     100

GM-06    6.01-7.00mm   0.01mm     100          GM-18   7.02-9.00mm    0.02mm     100

GM-07    7.01-8.00mm   0.01mm     100          GM-19   9.02-11.00mm  0.02mm     100

GM-08    8.01-9.00mm   0.01mm     100          GM-20   10.01-11.00mm 0.01mm    100

GM-09    9.01-10.00mm 0.01mm     100          GM-21   11.01-12.00mm 0.01mm    100

GM-10    0.30-2.00mm   0.02mm      86 

GM-11    2.02-4.00mm   0.02mm     100

.