multi-color fashion light up EL wire glasses for Concert Night Clubs party

EL Light Wire Flashing Shutter Shades Glasses is using the latest electroluminescent (EL Wire) technology and merging it with the latest design of shutter shades. This coolest EL Shutter Shades Glasses is unlike the regular LED sunglasses that just have a few points of light on the frame, the EL Wire runs through the frame of glasses and lights up the entire frame to make a brilliant glow effect!

It is broadly used in Discos, Bars, Parties, Raves, Costumes and festival celebrations to increase happy and lovely atmosphere. It is fashion among youths.

Shanghai Keyan Phosphor Technology Co.,Ltd is specialized in producing high bright el wire,which has 13 colors, it provides more DIY design space for glowing performance costume.

Specifications:1)round,diameter 2mm (recommended), which is  mainly manually used for finished costumes.

       2)single edge,diameter 2mm+5mm edge,mainly used by  garment manufacturer.

       3)double edge,diameter 2mm+each side 5mmedge, mainly used for garment manufacturer.

       4)dance wire ,round diameter 2mm or 4mm,excellent flexible.use more than once.

Color:13 sorts ,the best high brightness :Body color transparent (glows blue-green) and yellow-green.

Length:as usual 2meters for face or foot,5-10meters for body.

Driver and power: 3v driver(drive and battery in 1,2pcs AA) for driving within 2meters ,volume(9.0x3.2 x 2.0cm),weight 80g(with batteries),working hour 10hs.                 

12v driver(driver+battery box 8pcs AA) for driving within 10meters ,volume (driver 5.3 x 3.3 x 2.8cm, battery box 6X6X3cm),weight :275g(with batteries) working hour: 50hs ,it can connect to automible powder supply for direct use.

Control: driver itself with functions switch ( work mode:on/flashing/off) , users can also install simple manual switch between battery and driver, facilitate for glowing to match up music and design.

Factory information:

Customer visiting:

KPT EL wire Certification:

1/ What are the differences of 25 series of el wire products?

A) Line body motif classifications act for cord (Need to depend on card, groove, glue, bracket shapes), hardwire (Oneself independent bended molding, analogous wire), consumer can use directly.

B)Product acts for finished goods classification (Consumer uses directly), half-finished product (According to use request oneself match)

C)25 serieses product just about point general already know market's classification, include accessory and driver.

D)EL wire must work by alternating current(AC),Ordinary glowing wire must be matched with the specific driver(DC3V ,DC12V etc) for direct current use.

E)Lighting power

Ordinary type:  Longlife 3000 h,  Lighting power: 80cd/ m2,  Power: 0.22W/ m

High light type:  Lonlife 1000 h,  Lighting power: 140cd/ m2,  Power: 0.4W/ m

F)Price of glowing wire: $0.5/m---$5/m   

  Price depends on the factors including import materials and domestic materials, environment-friendly materials and ordinary materials,continuous length of wire(difference is over 50m), multicore or function( anti-tension,sdeadiness,shapes etc) .

2/ What to do if wire doesn’t light up( Supposing failure rate is 100%)?

A) To cut off the power promptly ,otherwise , inverter will be burned out; Check if power, driver and EL Wire connected correctly.

B) Check the end of EL Wire.

C) Cut 1 cm of wire off from the end to prevent the electrodes from connecting.

D) If wire suddenly doesn’t light up after several hours or days, check through above ways.

3/ Can the wires be used outdoors?  Will the color fade?

A) Yes, they can.

B) The red and orange color may fade after one years.

4/ Does the material of Electro luminescent Wire pollute the environment?

A) No, it doesn’t.Main ingredients: copper wire, plastic PVC,PU,PE,TPU-------------

5/ Result of improper handling of wire such as pulling or bending too hard

A) Disconnection of light, black spots, risk of short,burn out the driver.

B) Removable black spots in the glowing wireWhen applied force,the light is non-continuous flashing.

C) Breakdown or short in the connection between the glowing wire and electric wire.

D) The thicker the glowing wire is, the better anti-tension it has.The anti-tension glowing wire must be specially made.

6/EL wire working condition

AC 90V-150V  1000-4000HZ, the better condition is 130V and 1000Hz.

7/ Price of driver

A) Driver working condition: DC1.5V,3V,6V,9V,12V,18V,24V,AC110V,220V,etc

B) Single driver can drive the length less than 1m,1-3m,3-5m,4-10m,5-30m,20-50m,30-100m,50-200m,over 200m etc.

C) The price of the driver: $0.5/pcs--$83/pcs

It depends on the factors: power(drive length) if protect environment, sdeadiness of electric devices,if controlled by multipath, general or custom, order quantities, special requirement( waterproof, radiating, etc.)  

8/ What to do if driver does not work?

A) Check if power, driver and EL Wire are properly connected. (get through the power promptly,  to cut off the power promptly if the el wire doesn’t light or work)

B) Check if the driver make a buzzing noise.Generally it makes tiny buzzing noise.

C) If the driver stops working after a use, let it rest for 3-5 minutes before using again.

D) The driver becomes hot if not properly connected with the wire. Unplug the driver.