K-1000D;DMX SD card pixel controller;support standard dmx512 chip/DMX512AP-N/WS2821A;drive1024pixel;with address writer function

Specifications

K-1000D;DMX SD card pixel controller;support standard dmx512 chip/DMX512AP-N/WS2821A;drive1024pixel;with address writer function

K-1000D system features: 
     1,32 level -65 536-level grayscale control, software Gamma correction process.
2,supports a variety of point, line, surface light source, supports a variety of rules, shaped handle.
3,the controller outputs a port, with each port maximum 512 lights.
4,the controller can use multiple cascaded AC synchronous, play content stored in the SD card.
5,K-1000D store up to 30 files.

Support chips: 
Standard DMX protocol 250Kbps
Standard DMX protocol 500Kbps
UCS-DMX lights IC
UCS1903 1909 1912 High Speed

DMX512AP-N series IC

WS2821A series IC
Note: A single-IC simply pick and GND

Key meaning:

    Signal output (485):

Write code process:
     Wiring:

K-1000D;DMX SD card pixel controller;support standard dmx512 chip/DMX512AP-N/WS2821A;drive1024pixel;with address writer function

K-1000D system features: 
     1,32 level -65 536-level grayscale control, software Gamma correction process.
2,supports a variety of point, line, surface light source, supports a variety of rules, shaped handle.
3,the controller outputs a port, with each port maximum 512 lights.
4,the controller can use multiple cascaded AC synchronous, play content stored in the SD card.
5,K-1000D store up to 30 files.

Support chips: 
Standard DMX protocol 250Kbps
Standard DMX protocol 500Kbps
UCS-DMX lights IC
UCS1903 1909 1912 High Speed

DMX512AP-N series IC

WS2821A series IC
Note: A single-IC simply pick and GND

Key meaning:

    Signal output (485):

Write code process:
     Wiring:

Chip00—03 support for the IC

     00-- standard DMX 250KB
         01-- standard DMX 500KB
         02 - UCS curtain lights
         03 - UCS1903-DMX series

Chip04-06
        address writer code IC
         04 - UCS512A dmx address setting
         05 - WS2821 dmx address setting
         06-- DMX512AP-N dmx address setting

speed”3” means three channels

        
         Note: In the 00-03 mode, press Mode 8 seconds directly UCS512 write code, write code mode is the default three-channel

Encryption Glossary

Notes: 1, such as the controller proposes to add a differential relay over 50 m distance to the lamp.
       2, wire transfer signal is recommended to use a good quality UTP or RVVP shielded cable for transmission.

Specific parameters:
    Card:
          Type: SD Card
           Capacity: 128MB-2GB
           Format: FAT format
           Save the document:. * Led
    Physical parameters:
          Working temperature: -30-85 
           Power supply: DC5V input
           Power consumption: 3W
       Weight: 0.8Kg

Note:
      1, before copying the files to the SD card, you must format the SD card, attention is to be formatted before each copy.
      2, SD card must be formatted as "FAT" format.

ote: SD card controller can not hot-swappable, plug the SD card each time that you must first disconnect the power controller.