RF-KYA CE certification full-servo lady winge woman sanitary napkin machine,sanitary napkin machine price,sanitary napkin making

this sanitary napkin machine is our company make for north korea.

Below is the video of the machine,we upload the video to youtube and youku.

this is two website link:

/watch?v=TWYMD_ywWzU

/v_show/id_XODI5NTMxMDQ0.html?from=y1.7-2

If you have some questions and want to ask me immediately,you can add this whatsapp and talk to me,i will reply you in several minutes,this is Parker

whatsapp:+86 18368787879

Product structure

sheet non woven facrics
2.blue ADL
3.air-laid paper
4.SAP+wet strong paper
5.PE back film
6.release paper on back sheet
7.release paper on wings
8.samll pack film
9.fast-easy tape

_{we can offer the raw material with a good price or introduce chinese good suppliers to you.}

picture introduce:

1.main machine

2.glue applicator machine:

3.manual packing machine:

4.stacker:

5. full automatic adult diaper packing machine:

Machine type:

1.Full servo

2.Semi servo

3.Normal full automatic


Introduce of servo machine:

Our machine have 3 type,the price is different,servo means the machine equipment with servo motor,the full servo is best,semi servo is second,normal is third,the goodness of servo is the machine can run and be adjust more accurate,servo motor let the machine have less damage when the machine run some years.

below is the picture of servo motor

Main parameter

1.) Power supply:415V,50HZ
2.) Air pressure:1000L/MIN, 6-8BARs
3.) Product: winged sanitary napkin(fluff type and ultra-thin type with quick easy package)
4.) Product size: 290mm
5.) Structure of the product:

1. Breathable PE film 2. SAP and fluff pulp or wet strong paper  3.PE bottom film 4.release paper (side )5.release paper(center)6.hot melt glue7.packing PE film

6.) Power:120KW(exclude Air Compressor) 
7.)The design speed:400PCS/M(size 290mm)
  The stable speed:350PCS/M(size 290mm)
8.)machine size:19.5m*2m*2.3m(exclude the glue applicator machine and blower)
9.) rate of finished product:≥98%(excluded waste caused by glue applicator and reloading the raw material ). 
10.) Machine direction:by the client
11.)machine color: by the client


Configuration

1. absorber molding device:absorber wheel molding device:use alloy crusher crush the untreated wood pulp,adapt φ1200mm molding wheel make the absorber,recycle excess wood pulp,the pulp quantity control by frequency,adjust it by touch screen.

equip with web guide .
Absorber pressure device:adapt air cylinder adjust the pressure
Absorber Material Max width:200mm
Material Max external diameter:800mm
Shaft diameter:3 inch
 
2.SAP quantify adding:control by frequency and adjusted by touch screen
3.airlaid paper device(material is airlaidpaper and non woven facrics complex film)(function is ADL(acquisition distribution layer)):double material shaft ,equip with web guide .
ADC pressing device,adapt air cylinder adjust the pressure
Double shaft
Material Max width:150mm
Material Max external diameter:700mm
Shaft diameter:3 inch
Airlaid paper printing device

1. surface layer(PE peforated film):

Double shaft,equip with web guide .
Material Max width:200mm
Material Max external diameter:750mm
Shaft diameter:3 inch
5.PE bottom film:
Double shaft,equip with web guide .
Material Max width:200mm
Material Max external diameter:450mm
Shaft diameter:3 inch

1. absorber cutter device:adapt pressure spring adjust the pressure,collect the waster and sent it to the waster bin
2. Edge sealing device:adapt air cylinder adjust the pressure 
3. Center release paper :

Equip with double shaft
Material Max width:80mm
Material Max external diameter:450mm

1. finished cutter device:

Adapt pressure spring adjust the pressure,collect the waster and sent it to the waster bin

1. overturn the product device:adapt conveyor belt
2. Wing release paper(manual splicing material):double shaft

Material Max width:80mm
Material Max external diameter:450mm

1. product transfer and rotate 90 degrees device
2. Packing PE film

Double shaft,equip with web guide
Material Max width:450mm
Material Max external diameter:450mm
Shaft diameter:3 inch

1. easy quick package folding device
2. easy quick package pressing device:multiple rollers guarantee product be flat
3. Easy quick package cutter device:adapt air cylinder pressing the product
4. Product arrangement device

 
 
III.main point

1. the conveyor belt can absorb the product,when it is run high speed,it will not fly
2. Cutter adapt pressure spring protect the the knife from overload pressure
3. edge sealing,ADL and cutter adapt the air cylinder protect the device
4. Main machine adapt frequency control the speed
5. main machine adapt bearing,timing belt,right angle gearbox,equational box drive
6. Cutter,ADL,edge sealing,easy quick package adapt cardan strengthen the drive
7. Universal coupling guarantee high speed drive is stable
8. Floor and wall made by 20mm steel plate,the base made by 120*120mm square steel pipe to guarantee the stable

brand and origin
No.    part    brand    origin
1    PLC    Mitsubishi    Japan
2    Touch screen    Mitsubishi    Japan
3    Main frequency    Danfo    Denmark
4    Unwinding frequency    Danfo    Denmark
5    Temperature controller    OMRON    Japan
6    Low voltage apparatus    Schneider    France
7    pneumatic component    AIRTAC    Taiwan
8    Bearing    NSK    Japan
9    Conveyor    Habasit    Switzerland
10    Timing belt    Gates    USA
11    Web guide(5 sets)    FIFE    USA

Installation and Service:
 
The machine shall be ready within 120 working days after the Seller receives the deposit and the sample drawings have been confirmed by both parties.
The Seller shall inform the Buyer of the machine completion in written form by fax or by email.

    Payment term:
The Buyer shall pay the Seller 30% of the total contact amount by TT payment within 10 days from the date the contract is signed, 70% balance shall be paid by the TT before loading .
Note: If Buyer cannot pay the deposit by the specified date as required above, the Seller has the right to re-price the machine.
    Approval before shipping
Machine will be tested and approved in seller's factory before delivery. The time for testing in seller's factory will not be more than 15 minutes. Raw materials consumption within 15 minutes will be afforded by seller. If customer needs more time for testing, the cost will be afforded by the buyer.
The wastage excludes the circumstances when glue applicator breaks down or exchange material.

    Quality guarantee period and wage
The Seller offers a 12-month quality guarantee period from the delivery date. During this period, the Seller shall repair the machine and provide repair parts (wearing parts, and parts subject to normal wear and tear (such as cutters and belts, etc)or damage attributable to the Buyer excluded). The damage attributable to the Buyer shall be repaired at the Buyer's cost. (the warranty period is valid from 30 days after the buyer is informed of the test of the machine.)
    Installation and Testing  
1. The Seller shall be responsible for the first installation and adjustment of the machine sold.
2. Installation and adjustment abroad: The Buyer shall pay for the transportation, accommodation (room and board) and translation if it requires the Seller to offer after-sales services such as installation, adjustment, training workers, and machine maintenance abroad. The accommodation offered by the Buyer shall be of three-star standard of China's Hotel at least.
3. The Buyer shall pay the after-service technicians sent by the Seller 100USD per day during extended time. The term of extended time must be within10 working days.
4. If the installation can't be done for the reason attributable to the Buyer, like lack of supporting facilities or raw materials, the Buyer shall pay the technicians sent by the Seller 100 USD per day during the extended time. All the payment shall be made within three days after the installation and adjustment is completed. Otherwise, the Seller has the right to terminate after-sales service.

    Important note:
The wastage excludes the circumstances when glue applicator breaks down or exchange material.
Seller will inform Buyer of coming for testing the machine or machine ready information in written
 Paper sent by fax or by email.
Buyer can't privately ask our engineer stay at his factory work for them after Seller's engineers finish
The installation and training, if the buyer needs technician work with them for one year or longer time,
The buyer has to contact our company manager. Otherwise, we have right to stop all the after the sales
service, and the buyer will be held accountable and compensate for the losses caused to the Seller.