high frequency induction melting furnace

Medium frequency induction melting furnace

MF-240

Maximum input power: 240KW

Maximum frequency: 1-20KHz (customized according workpiece requires.)

Maximum input current: 360A

Output current: 40-430A

Output voltage: 70-550V

Input voltage: 380VAC three phases, 50 or 60Hz (custom make according customer requires)

Duty cycle: 100%

Auto heating time: 0.1-99.9seconds

Auto retaining time: 0.1-99.9sedonds

Cooling water: ≥0.2Mpa ,≥15L/min

Generator size: (L x W x H):800 x 560 x 1800mm

Generator weight:267KG

Compensating capacitor size (L x W x H):500 x 400 x 500mm

Compensating capacitor weight:87KG

Typical applications:

1. ≤400KG of gold,silver,copper, brass melting.
2. ≤150KG of steel, stainless steel melting.
3. ≤150KG of aluminum , aluminum alloy melting.
4. heat for matching of shaft into hole.
5. Heat of steel or brass rod and nut for forging
6. etc.

Main features of MF melting furnace:

1,  MF melting furnace can be used for the melting of steel, stainless steel, brass, aluminum, gold,silver and so on.

2,  because of the stirring effect which caused by the magnetic force, the melting pool can be stirred during the melting course to ease the floating of the flux and oxides to produce high quality casting parts.

3,  wide frequency range from 1KHZ to 20KHZ, working frequency can be designed by changing the coil and compensating capacitor according to the melting material, quantity, stirring effect desire, working noise, melting efficiency and other factors.

4,  compared with SCR medium frequency furnace, it can save energy at least 20% and up.

5,  small and light, a lot of modes can be selected to melt different amount of matals. Not only it is suitable for the factory, but also suitable for the colleage and researching companies to use.

6,  24hours non-stop melting ability.

7,  it’s easy to change melting furnace for different capacity,different material, different way of pouring out, to suitable for all kinds of requirements.

Main models and melting abilities:

The table below lists the main models and recommended maximum melting abilities. About 50 to 60 minutes are needed to finish one melting process at cool status of the furnace, at hot status of the furnace, only 20 to 30 minutes are needed.

...