4.3 inch high brightness LCD screen car interior rearview mirror monitor with Auto dimming reverse camera display

Product Description

Features

1. backup camera
2. automatically brightness adjustment
3. 4.0mm glass and 23mm car factory OEM bracket
4. adjustable guide line
5. auto-dimming
6. Special anti-glaring glasses for eye sight protection, in position of the original rearview mirror
7. Automatically switch to rear view system when reversing, ensure to parking safely.

8. Easy for installation and uninstallation
9. replace the original car mirror(provide different car mirror base)

Dimming

Auto-dimming

Why is it necessary to install an automatic dimming in the car endoscopic it?

The reason is very simple, because the glare from the mirror easily lead to accidents, and auto-dimming mirror is an effective security products to avoid the accident. Studies have shown that when driving at night, and behind the vehicle the driver headlight glare can cause night blindness. Even after removal of glare light, the images left in the eye can cause blind spots, a phenomenon known as "white Ban effect." This effect will reduce the driver's reaction time of 1.4 seconds. Hundred kilometers per hour when the car driving in front of you to respond before the dangerous, 1.4 seconds, enough to travel as much as 42 meters.

This is undoubtedly greatly increased the crash or cause risk of injury to passengers in the car.

The need for anti automatic rearview mirror project?

Auto-dimming inside rearview mirror hands-regulation, which automatically darken when glare is detected to protect the drivers vision. That eliminates glare and prevent driver fatigue, improving driver reaction time and shorten the braking distance to make nighttime driving safer. Seat belts and air bags may lead you to a traffic accident survived, but the auto dimming endoscopy will help to avoid accidents. Auto-dimming inside rearview mirror is a high-tech electronic products, with the traditional ordinary prism there is a big difference. Auto-dimming inside rear view mirror to detect glare and automatically dimming to protect driver's field of vision, making nighttime driving safer.

Various brackets

OEM bracket for special rearview mirror monitor with 23mm-thickness pipe.
Toyota Camry, Prado, Crown, Reiz, Buick Regal,GL8,Mondeo,Focus,Mazada 6,Odyssey,Galand,GM
HRV, Lova, Tiida, Tenna, CRV, Passat Bora, MFI,Audi, Skoda , Jetta ,Epica, Chery 06,Sonata,Elantra, Mitsubishi . 

KEY Points:

We have the brackets for almost all cars, pls send us the picture of your bracket for our final confirmation.Because we are responsible to you. We just want to avoid any mistake, and offer you service and the product that you are satisfied with.

Shipping:

1.Tracking number will be emailed to you once we have shipped your order. If there is any delay, it may be caused by bad weather or custom inspection. If you still can not receive the item within 20 DAYS, pls contact us.

2.We try our best to make you get desired products as soon as possible. In case you receive wrong products due to shipping error, please contact us for exchange or refund. If it's damaged , please refuse to accept and contact us as soon as possible.

3.We are not responsible for wrong or undeliverable address. Please provide us your  full address with Telephone number and make sure your shipping address is correct and deliverable.If you need to change your address, please change it in PayPal first before you pay.

SAFETY

1.The rear camera display is only a visual assist device when  reversing the vehicle. The image on the screen may be different from the actual conditions. Always look directly with your eyes and drive carefully.

2.Backup as alow as possible since high speeds might limit your reaction time to stop the vehicle.

3.The displayable range varies depending on the vehicle loads and road conditions.

4.Do not use the rear view camera system with the tailgate open.

5.Objects under the bumper or around the bumper can not be displayed.

*What is auto adjusting brightness?

The brightness(only for the 4.3"display screen,not for the entire mirror) will change automatically according to the environment light. When the environment light become stronger, the screen brightness will increase accordingly to ensure more distinct image in strong light. When the environment light become weaker, the screen brightness will decrease in order to protect eye against being stimulated due to over-brightness of the screen. 

* Which Mirror bracket (Mount) works for my car?

We have many OE style brackets for most of the popular cars (See below compatible vehicles list) but we highly suggest you to send us a photo of your original bracket bottom and tell us your car makes and model. then we will confirm to you which bracket NO. is matched for your car, and make sure you leave us message about bracket NO. when ordering, other wise, we will send you bracket as default