High output high frequency electromagnetic induction heating equipment

High output high frequency electromagnetic induction heating equipment

Induction hardening

1. All kinds of gears, sprockets, shaft quenching;
2. a variety of axle, leaf springs, fork, valve, rocker, ball stud and other auto parts quenching.
3. All kinds of engine parts, gear parts hardened surface;
4 bed machine tool of machine tool industry guide of quenching (lathe, milling machine, planer, punch, etc.).
5. All kinds of pliers, knives, scissors, axes, hammers and other hand tools quenching.

3.Induction brazing

1 piece of diamond drill bit composite welding;
2 of carbide blade, saw blade welding;
3. All kinds of cutter, drill head, drill pipe, coal drill bits, drill bits and other mine parts of the wind welding;

Features of igbt induction heating equipment:

1,  high frequency transistors my company adopted than high frequency power saving up to 40-60%, saving 60%, external support facilities to reduce investment by 75%.
2, a unique cooling circulation system, ensure that the equipment 24 hours of continuous work.
3, small size, light weight, easy to move, no million-volt high-voltage danger, safe operation.
4, high reliability, easy to maintain and improve the over voltage, over current, overheating, lack of, water and other self-protection.
5, the use of large scale integrated circuit digital automatic control, with manual, automatic, semi-automatic and fixed time control.
6, automatic frequency tracking, stepless power adjustment, easy to use, 10 minutes to learn.  

Select the frequency of induction heating equipment:
According to heat treatment and heating depth required, select frequency. The higher the frequency, the more shallow depth of heating.
1.The depth of the high-frequency (above 10KHZ above) for heating is 0.5-2.5mm, generally used for heating medum-sized or small parts, such as small modulus gear and medum-sized and smalll shaft parts.
2.Intermediate frequency IF (1-10KHZ) heating a depth of 2-10mm, generally used for large diameter shaft and medium-sized modulus gear heated.
3.Power Frequency (50HZ) heating the hardened layer depth of 10-20mm, generally used for large size parts diathermy, large diameter parts (diameter 300mm or more, such as rolls, etc.) surface hardening.
We are induction heating industry exhibition

 Thanks for your reading !