plastic polyethylene pipe extruder line/production line

 plastic polyethylene pipe extruder line/production line

1. Diameter: 16-800mm,
2. Output: 150-850kg/h,
3. Extrusion speed: 0.1-15m/min,
4. Installed power: 85-600kw

Process

material Hopper Dryer and Auto charger → PE pipe extruder → marking line extruder → mould → calibrator → vacuum calibration tank → spray cooling water tank →  printer → haul-off → cutter → pipe discharging rack

Description

  This PE pipe extrusion line can be used in HDPE Large Diameter Gas and Water Pipe which have excellent stiffness and flexibility, heat resistance, aging resistance, high mechanical strength, resistance of environmental stress cracks, resistance to creep deformation, heat-linkage, and so on. So, it is a preferred gas and water pipe for ductwork system between city and its suburb, Large diameter HDPE pipes start to play very important role in the city water and gas supply systems.

Features and application

 1. This production line is mainly used for producing water supply pipe and drainage in the field of agriculture and construction, cable etc.

2. This machine group consists mainly of vacuum calibration tank, haul-off unit, stacker etc.

Single screw extruder and haul-off unit apply famous A/C frequency conversion speed regulation device, both vacuum pump and driving motor apply famous brand.

3. The haul-off unit includes two-claw type, three-claw type, four-claw type, six-claw type, eight-claw type, ten-claw type, twelve-claw type etc.

4. Non-bits cutting machine, saw blade cutting machine or planetary cutting machine can be applied,

Main technical parameter

HDPE pipe extruder line: