10000mah Power Bank for IPad,Tablet PC,Smart Phone

Specifications

Introdution:

This product is a high-capacity portable digital mobile power with a bluetooth keyboard: Products imported high-performance polymer batteries, the capacity can be achieved 10000mAh, which combines the dual charger and backup battery, Bluetooth 3.0 transmission.With USB output, through choosing different output line by adding optional adapter, it can give charge for mobile phones, game consoles,IPOD, IPHONE, IPAD, PDA, MP4, MP5, PMP, MID and other devices with USB charging; charging  by using USB on the computer.The charge is very convenient to use, which can resolve the equipment trouble of without electricity anywhere, anytime for you.

Product Specification:

·Output: 5V/1.5A   5V/800MA

·Input: 5V/1.5A

·Capacity: 10000mAh Lithium-polymer battery

·Charging time:8~10 hours

·Cycle life:>500 times

·Working temperature: -10°C-40°C

·Storage and carry temperature: -20°C-50°C

·Volume: 210*106*14.5mm

·Weight:600 gram

·Carry way: on the travel bag, computer bag or in the car

·Battery indicator: 4LED lights display battery.

Charging display: when charging 0~25%, a light flashing, others doesn't light, when charing to 25%~50%, the second light flash,the first light become constant light, when charge to 50%~75%, the third light flash, the first two lights become constant light,the first light become constant light, when charge to 50%~75%, the third light flash, the first two lights become constant light.

·Charging Method: Use the original power adapter by adding charging adapter to give  direct charge of the product.

·Applicable equipment: to give all the devices with USB charging, such as mobile phones, PSP, IPOD, IPHONE, IPAD, MP4, PMP, GPS, Bluetooth, digital cameras.

·Discharge display: long press the power button, 4 LED lights flash at the same time for 3 times then long bright. then charge for all devices with USB charging.

Keyboard usage:

·Step I.

Insert the Bluetooth receiver into the USB interface of the corresponding computer, if connected devices have built-in Bluetooth  receiver, it’s no need for this step(such as the Samsung P1000, IPAD which don’t need bluetooth receiver).

·Step II.

Turn on the power swith of Bluetooth keyboard, display lights up.

Click on the frequency switch, in this way indicator will flash.

·Step III.

Open Bluetooth of the connected devices, and began to search for bluetooth keyboard of YLS-811. Connected devices will search for it automatically, the system will pop up the corresponding dialog box and display the appropriate security code, input dialog box prompts security code in the Bluetooth keyboard and press ENTER, it says the connection is successful, while the keyboard  lamp stops flashing.

·Step IV.

After properly connected, usually, the computer will install some driver files automatically, then it can be used normally.