Baby Health Mikl Powder Milk Maker - Buy Baby Milk Make Machine

1. To remove the milk power dispenser from the main body, turn it to the left until you hear a “clicking: sound. Flip the dispenser over the unscrew the base. The dispenser is now “UPSIDE DOWN”. Fill the dispenser with milk powder, replace the cover, and return to its original position on the main body/
2. Add water to the water dispenser.
3. Connect the Baby Milk Espresso Machine to the home power source with the cord supplied.
4. If you need the water heated to 100° C for sterilization, turn the switch to “heat” at the back of the machine. Once the water reaches boiling point, the Baby Milk Espresso Machine will switch off automatically. Once this happens, chance the switch to “warm” and wait until the water cools to 45°C.
5. If you need the water heated to 45°C, turn the switch to “warm”. The water can be kept at this temperature for as long as required.
6. Place the milk bottle or cup in the correct position.
7. Press the water button and hold down until you have filled the required amount of water.
8. Open the milk powder mouse cover, press the milk powder button and hold down to release milk powder into the bottle or cup (EACH MILK POWDER PUSH=2.5g).
9. Press the mixing button and hold down for 4-5 seconds to mix the milk powder and water thoroughly.

Q: Can I use different teats with the bottle?

A: Yes, this is a standard wide neck bottle and can accommodate most standards teats that are available in the market.

Q: Can I use my own bottle:

A: The milk will have to be made in the bottle or cup supplied as they have the special mixing parts at the bottom, once it has been made, it can then be transferred into any bottle of your choice.

Q: Why does the Baby Milk Espresso Machine not switch on?

A: Ensure the machine is correctly plugged in to the powder source, check the switch at the back is in the “warm” position. If the machine still does not work, contact you distributor for further assistance.