Waterproof Electronic Fence Shock Electric In-ground Fencing System For Dog Pet

Specifications

In-ground Pet Fencing System W-227

This hidden W-227 fencing system is among the most reliable, cost-efficient pet containment systems available today. A buried wire transmits a harmless radio signal. When you dog approaches the boundary, the signal causes the dog's collar receiver to deliver a warning beep first. If your dog continues closer to the boundary, the system will issue a mild shock. If your dog continues further, the system will issue stronger shocks until your dog returns to within the boundary your have set up. Your dog will naturally seek to avoid correction, and is content staying within established boundaries.

Main Features:

• Pulsed Proportional Stimulus-The closer your dog gets to the boundary, the more intense the shock will be;

• Progressive Tone Stimulus-A warning tone will be issued first, then a shock stimulus if your dog continues to move closer to the boundary;

• Variable Field Width Control-Allows you to precisely control the width of the signal field;

• Audible and Visual Wire Break Indicators-Should your buried wire ever break, aloud sonic alarm will sound accompanied by a flashing light;

• Speed Detect Anti-Run through-The faster your dog is moving, the quicker the higher level of intensity is issued;

• Built-in Lightning Protection-Protects transmitter from power surges caused by lightning strikes;

• Multiple Collar Operation-Add as many collars as you like to contain as many animals you have. There is no limit to the number of collars it can control.

• Up to 5000 square metre range (over 1.2 acre).

Package Includes:

• 1 x Indoor wall-mounted transmitter

• 1 x Power plug

• 1 x Adjustable receiver collar (waterproof)

• 1 x Collar battery (9 volt)

• 1 x boundary wire (300m)

• 2 x Training flags

• 1 x User's manual
 some accessories

How to setup: 

1.Wall-mounted transmitter: Transmitter is the central controller to whole electronic system. Make sure the wire is set to a loop

2.The receiver collar: Receiver (collar) will make a warning beep firstly and then continuous stimulation if your dog attempts to approach wire boundary.

3. How to install the system

           a. Design your containment area and calculate the amount of wire needed.

           b. Install the wall transmitter.

           c. Lay out the perimeter wire.

           d. Connect the perimeter wire to the wall transmitter.

           e. Verify transmitter is functioning without problem.

           f. Set up the receiver and then, test the containment system and adjust the field width.

           g. Install the boundary wire and training flags.

           h. Fit collars to your dogs and train your dogs

           i. Then you can enjoy with the trained dog

If you need more information about an item, call us. If you can't find an item, call us. 
Prompt, efficient and friendly service is our hallmark, and we're anxious to prove it to you. 
You can reach us Monday through Friday 8.00am - 6pm. 

Mob: +86 18682245181

Tel:+86 0755-27589087  

Fax:+86 0755-27570739

If you would like more information or to place an order please contact us : sales03 at .
For wholesale enquiries please contact us : sales03 at .