Specifications

New Arrival Jyicoo Automotive Tool Battery Charger 12v Starter Shenzhen Panke

Product parameters

To jump start 12V vehicle
1. Make sure that there is no less than 2 indicator lights can be bright Verify that the appliance power indicator in two or two or more..
2. Connect the red battery clamp of jumper cable to the vehicle's positive (+) battery terminal and connect the black battery clamp of jumper cable to the vehicle's negative (-) battery terminal.
3. Plug the connector of jumper cable into the jump start socket.
4. Start the vehicle.
5. When the vehicle starts, remove jumper cable from Jump Starter within 30 seconds.
6. Remove the battery clamps.
According to product design, under normal circumstances can start the car more than 20 times.

To charge your phone/tablet and other electronic products
1. Select the equipped USB cable or other suitable cable.
2. Plug the USB cable to 5V 2A USB output port.
3. Connect the other end to your phone / tablet computers and other electronic products.
4. Press the power switch to charge. Indicator lights will light during charging.
The built-in battery capacity is 12000mAh, to give Iphone5 charge, for example, never power off the handset is fully charged, can be continuously filled seven times.

Packing List
Host appliance ×1
Travel charger ×1
Car charger ×1
Jump cable with battery clamps ×1
USB cable ×1
Flannelette bag ×1
Digital Bag ×1
User manual ×1
Quality certificate ×1

If you are interested in this Battery Charger 12v Starter, please leave us a kind inquiry for more details of this item.