Modified Starch Textile Printing Thickener

Specifications

CBH are in the position to offer two kinds of Modified Stach for textile printing thicker:

• Modified Starch (TGS5-C)
• Modified Starch (TGS5-D)

Our Modified Starch (TGS5-C) is featured with:

• Easy printing paste formation
• Good rheological property
• Free from preservative
• Good resistance to electrolyte

Application:

Thickener for printing paste, specifically for

• disperse dye printing
• rayon discharge printing
• nylon spandex fabric printing 

Specification:

• Appearance: White or off-white granulars
• Solubility: Swelling in cold water
• pH: 10-12.5
• Viscosity (8% solution): ≥35,000 mPa.s (by BH viscometer) 
• Ionicity: Anionic
• Moisture: ≤14%

Preparing of printing paste:

Dosage: 7-8%

Add the modified starch powder into water while stirring. Rest the paste for 3-4hours, and then stir a few serve, the paste is ready for use.

Notice: The longer rest time during preparation, the better leveling performance of the paste.

Our Modified starch (TGS5-D) is featured with:

• Easy printing paste formation
• Good rheological property
• Free from preservative
• Good resistance to electrolyte

Application:

Thickener for reactive dye printing paste

Specification:

• Apprearance: White or yellowish granulars
• Solubility: Swelling in cold water
• pH: 10-12.5
• Viscosity (10% solution): 12000-18000 mPa.s
• Ionicity: Anionic
• Moisture: ≤14%

Preparing of printing paste:

Dosage: 7-8%

Add the modified starch powder into water while stirring. Rest the paste for 3-4hours, and then stir a few serve, the paste is ready for use.

Notice: The longer rest time during preparation, the better leveling performance of the paste.