sand blast rubber hose

1.Cord Sand Blast Rubber Hose

USE:

Used in wind-pressure sand-spraying machine to get rid of the rust by spraying sand or with iron ball.

CHARACTERISTICS:

The inside layer is wear-resisting and the outside layer good at anti-aging and wear-resistance .The burst

pressure of the hose is four times or more higher than the working pressure.

2.Wire Braid Sand Blast Rubber Hose

Use:

Used in wind-pressured sand-spraying machine to get rid of the rust by spraying sand or with iron ball.

CHARACTERISTICS

The inside layer is wear-resisting and the outside layer good at anti-aging and wear-resistance .The burst

pressure of the hose is fourtimes or more higher than the working pressure.

3.Wear-resistant Suction Rubber Hose

USE:

Used to take out and suck solid materials or grain materials such as mineral sand,bites of coal and cereal

(rice,wheat,corn)etc.

CHARACTERISTICS:

The inside layer of the hose is good in flexibility and wear-resistance.

while the outside layer is excellently anti-aging and wear-resistance.The hose has the double properties of

bearing both the positive and negative pressure can be used normally under the pressure of the hose is four

times of more higher than the working pressure.