Wire braid Sand blast rubber hose

1.  Cord sandblast rubber hose

USE

Used in wind-pressured sand-spraying machine to get rid of the rust by spraying sand or with iron ball.

CHARACTERISTICS

The inside layer is wear-resisting and the outside layer is good at anti-aging and wear-resistance. The burst pressure of the hose is four times or more higher than the working pressure.

2.Wire braid sand blast rubber hose

USE

Used in wind-pressured sand-spraying machine to get rid of the rust by spraying sand or with iron ball.

CHARACTERISTICS

The inside layer is wear-resisting and the outside layer is good at anti-aging and wear-resistance. The burst pressure of the hose is four times or more higher than the working pressure.

3.Wear-ressistant rubber hose

USE

Used to take out and suck solid materials or grain materials such as mineral sand, bits of coal and cereal(rice, wheat, corn) ect.

CHARACTERISTICS

The inside layer of the hose is good in flexibility and wear-resistance, while the outside layer is excellently anti-aging and wear-resisting. The hose has the double properties of bearing both the positive and negative pressure can be used normally under the pressure of -80kpa (600mm mercury) at the vacuum. The burst pressure of the hose is four times or more higher than the working pressure.