PVAC glue for all kinds of wood working

YF - 500 environmental protection PVA white glue

                             for PVC floor glue water   (4~6 m2/KG)

Product  introduce :

High water-soluble adhesives with strong waterproof , good interpenetrate ,Anti-static, suit of all kinds of PVC paste coil and wood, foam and PVC carpet ,layer, etc.

Advantages of features:

(1) The construction temperature can be in 15 ~ 45 ℃;
(2) Water-based adhesive, non-toxic, no burning;
(3) Single sided gluing, strong adhesive force;
(4) Economy usage of coating large area;
(5) Excellent water resistance .

Ingredients:

   Waterborne acrylic emulsion, excluding GB18583 (interior decoration decorates material harmful material) in the adhesive of harmful substances, total volatile organic  content is less than 50 g/L.

Method of use:

(1) To glue floor must be clean, dry, level off, cement floor can't up       the sand, if cement floor, can use putty caulking, leveling.

(2) Using the standard blade scraper (A2 / A3) from PVC floor glue           evenly on the ground, glue when you a have a shave and a length of       the room, width of 0.7 ~ 1 m.

(3) Of the sizing after waiting for glue water loss, until the glue is       transparent rear can laid, waiting time for about 15 ~ 40 minutes,      .It is the greater ralated humidity, the time is longer.But generally     not more than 40 minutes.

(4) Slot and weld after completed 2 ~ 3 hours, the floor can be used         after 24 hours.

Sticky: 12000 ~ 15000 mpa. S / 25 ℃


Note:

(1) Recommended to use standard sawtooth blade.
(2) Store in shade before opening, avoid sunlight directly.
3. Validity: suggest to use within six months.


Execution standard: JC/T550-1994

RFQ

Q1:What ‘s your product range?

1,Contact adhesive

2.PVA white glue

3.Silicone sealant

4.No more nail

5.Electronic white glue

Q2: Are you a manufacture?

Yes,we have beening in providing professional solutions on adhesive industry 20 years from 1995.

Q3: Do you have stock products to sell?

No,we work on ODM or OEM orders. That’s means size, material, quantily, design, packaging, solution ,etc will depend on your requests.

Q4:What information should I let you know if I want to get a quotation?

1,The size of packing.

2,The material & component data.

3,The quantity.

4,The certificate you need.

5.If it is prossible , please also provide with picure or design for checking. Sample will be best for charifying.If not ,we will recommend relevant products with detail for reference.

Q5:How many days will samples be finished? And how about the lead time of production?

Grenerally,3-5 days for samples making.The lead time of mass production will depand on quantity, production art etc.10-15 working days for 10 Tons.