50L High efficiency water Rotary deburring polishing machine

plywood

Specifications

50L High speed Rotary grinding deburring polisher machine for small parts

Using 

1. Vortex polisher using the original vortex flow principle, the workpiece and the grinding stone to achieve fast enough friction,
superior light efficiency, improve efficiency 15-30 times.
2. Vortex polisher turntable motor for the motor, may need to select the speed dial; timer with digital display, easy to operate,
can always spot the workpiece situation.
3. Vortex polisher turntable fixed tank and lined with polyurethane rubber, and the gap between adjustable turntable,
wear resistance and long service life.
4. Vortex polisher for smaller workpieces.
5. Vortex polisher with a strong ability to burr grinding, chamfering, go black film, polishing.
6 vortex polisher with a solenoid valve speed or inverter, to avoid product running too fast, hit each other scratches.
2 Applications

Vortex polisher mainly applied to electronic accessories, luggage fasteners, hardware terminals,
plastic silicone, aviation parts and other industries.

Use vortex machine (water machine) should pay attention to several issues
  There are many companies using eddy current machine to process electronic hardware, plastic parts, in use because of the structure, working principle understand the vortex machines much, some misuse, abuse, causing the machine's fault, in fact, many failures can be you can avoid or reduce, the following few questions some use should pay attention to are listed below:
 
1 machine to the zero line
Vortex machine is generally controlled by the frequency converter speed dial back, when you install a vortex machine, be sure to take the zero line, to prevent the inverter generated pulse current wounding.
 
2 Do not dry running
Grinding groove vortex machine because fixed by grinding groove back wheel composition, the gap between them is between 0.5-0.8MM, run vortex machine, the back wheel driven rotary abrasive grinding groove formation vortex motion, if not grind groove add water, dial back rub each other with a fixed tank, a sharp increase in short-term temperature, leading back to the turntable and fixed slot adhesions, causing malfunction. Abrasive and workpiece ratio of 2: 1 to join the grinding tank, then add the right amount of abrasive and water, the water should be at least more than back wheel gap with fixed slots.
 
3.The polishing composition of claim 
Join grinding grooves do not exceed the weight of the workpiece single 1KG, the minimum thickness of not less than 2MM, to prevent the gap plugged back wheel with a fixed slot; addition, those razor blade-shaped parts such as do not use a vortex machine to machine.
 
4 Check the V-belt
    If the V-belt is too loose, slipping at runtime phenomenon, then you can adjust the adjusting screw motor plate, adjust the V-belt to the proper tightness, and then tighten the screws.

Work pieces after be finishing by this machine 

ork pieces after be finishing by this machine 

50L