Good quality Desoldering wire copper braid wick braid electronics grade desolder braid 3.0mm (W) *1.5m (L)

soldering wick(electronics grade)

Desoldering wire electronics grade (absorb solder inside) soldering wick 3.0mm (W) *1.5m (L)

Usage: in the soldering iron with the heat, soldering wick can absorb solder inside, in order to realize the need to rework the PCB board or repair electrical goods solder removal. This product with strong solder absorption capability, non-halogen,in full compliance with no-clean electronice grade requirements, Rohs and REACH regulations, two-year shelf life.

Discription:

1.Desoldering Wire Soldering Wick are made of pure copper with special chemical formula refined but become, guarantee fast, good, province;

2. Used to absorb redundant when the tin solder, resistance to oxidation, corrosion resistance, tin on heat conduction performance is good, absorb clean;

3. In the desoldering, chip after take off, circuit board there will be a lot of solder, this affects chip welding; Usually adopt tin with cleaning, absorption method is to put the soldering iron tin with absorption and then moves slowly on the chip bonding pad, such as the solder melts will be tin suction belt, although feet between tin, such clearing board is clean;

4. Can best use plate after water wash machine plate chip position completely; Tin suction belt can be used to compare big patch element.

25pcs/inner box,  40box/ctn
neutral label , OEM by design label

1.Rapid soldering  wicking & performance

2.Removes redudant solders 

3.Removes PCB's solder bridges

4.Tight weave braided copper

5.5 feet of wick on spool

6.Width:0.075'' or above.