fire extinguisher CO2 filling machine WITH PCA

fire extinguisher CO2 filling machine WITH PCA

The unit can draw carbon dioxide both from cylinders and cryogenic tank, for the latter, this must be specified The unit equipped with valves and stainless steel joints as well as teflon inox pipes compatible with the when ordering, food industry.The unit is able to fill a wide range of small cylinders available on the market and, thanks to an accessory, it can also fill cylinders with handwheel valve up to 5 kg, and over with external scale. The power supply is 220 V; having a low absorption it can be connected to any electrical system. This unit offers the possibility to fill either in manual orautomatic mode:

•

The operator activates all the filling phases manually.

•

The operator locks the small cylinder with the pneumatic clamp and activates the automatic cycle; the machine carries

out automatically the actions for the weight filling of the small cylinder.

All of the filling phases are controlled by an integrated electronic weighing system with automatic pump disconnection

once the (desired) weight has been reached. It is also possible to store and recall 12 preset weights when needed

TECHNICAL SPECIFICATIONS

• Overall dimensions approx. L x W x H 1050 x 550 x 1180 mm;

• Weight 120 kg;

• Power supply: 220 V. 1,1 Kw + compressed air 8 bar

• Co2 pump 3 It/min;

• Small cylinder pneumatic clamping;

• Electronic weighing system - capacity 20 kg - scale 10 gr.

ACCESSORIES ON REQUEST:

• Small cylinders filling kit with handwheel valve up to 5 kg;

• External weighing scale and piping for filling of cylinders over 5 kg;

• Kit for connection to cryogenic tank;

• Filling kit for filling of internal small cylinders of fire extinguishe

PC4 is designed to be used to fill extinguishers or cylinders for carbon dioxide by compressing liquid CO2 at high

pressure directly inside the cylinder. It can be used for cylinders and extinguishers with a capacities ranging from 0.2 to 50kg. It is fitted with a universal quick fitting with vent for the removal of residual CO2. As compared to models PC1 and PC2,this system has a larger pump that runs at a lower speed and is driven by a belt and

pulley. The sealing gaskets are less exposed to wear. This system can therefore be used continuously for high

output applications.

COMPONENTS

• Steel stove enamelled frame

• Electric motor, 380 V three phases - 1400 rpm - 3 Hp

• Large CO2 pump

• Max capacity: 13 kg of CO2 at 90 bar

• Pump motor/belt coupling protected by a metal mesh

PUMPS CO2 – PCB

TECHNICAL INFORMATION

- Steel frame in focus;

- Dimensions WxDxH 600x400x600 mm =

- Weight 45 kg.

- Electric motor 380V three-phase 2.2 Kw;

- Max capacity 13 Kg. Of CO2 at 90 bar;

- Couple engine pump belt protected by wire mesh;

- Electric control box fitted with gear selector and stop, warning lights and general electrical switch;

- Safety valve;

- Adjustable pressure switch;

- Recirculation valve three-way

- Hoses A.P.

- 380V 16A 3P

The apparatus allows the PCB loading extinguishers or cylinders for carbon dioxide compressing the liquid CO2 extracted directly from the tank cryogenic (tank) directly within the cylinder. It Can be used for cylinders or tanks from 0.2 to 50 kg of capacity. The equipment PCB has a universal connection Quick vented CO2 residual. As the PC4, the pump PCB having an increased pump that operates at low speeds through belt and pulley, has less problems of wear sealing and can be used also for continuous and high production. It 'also equipped with three-way recirculation valve

PC1 and PC2 systems (220 or 380 V) are designed to be used to fill extinguishers or cylinders for carbon

dioxide by compressing liquid CO2 at high pressure directly inside the cylinder. They can be used for cylinders

and extinguishers with a capacities ranging from 0.2 to 45 kg. They come with a universal quick fitting with vent

for the removal of residual CO2.

ART. PC1 – 220V 2.2 Kw 8Lt/min

ART. PC2 – 380V 2.2 Kw 8Lt/min

COMPONENTS

• Steel stove enamelled frame

• Electric motor and pumping assembly connected to pulleys and belt, protected by a metal mesh

• Electric junction box with start/stop button, lamps and main switch

• Calibrated safety valve

• Adjustable pressure switch

• High pressure hose

MIXERS M1

Mixing by diffusion nitrogen cylinders for gas installations

Through the oscillation programmed the machine spreads the nitrogen gas in the gas extinguishing content

inside the cylinder. The times of oscillation can be set by the operator.

TECHNICAL INFORMATION

- Overall dimensions totals approximately L x W x H 1700 x 2200 x 2200 mm;

- Steel frame in focus with side shields for the operator;

- Protections front and rear for the operator;

- No. 1 pneumatic vice;

- Three phase motor 1.1kw, with reduction gear for tipping;

- Power supply 380v 16A 4 P + air 8 bar.

CR6

The equipment test MAX 450 BAR 6 bottles at a time of any capacity. It is equipped with a system that allows loading of water in the cylinders automatic and empty them via tilter. It is equipped with a water reservoir that allows you to work in closed circuit with a total system for purging air inside the cylinders.Is possible to vary the number of cylinders to be tested according to the customer's needs. It 'also possible to equip the machine with a double ramp with 2/4/6/8 cylinders ramp.

COMPONENTS

Painted steel frame in focus.

N. 6 bit with pneumatic closing contemporary.

N. 6 special attacks to bleed the system.

Three phase electric motor with double reduction gear.

Stainless steel tank cap. 0.5 mc.

Hydropneumatic pump with maximum pressure of 300 bar.

Pressure gauge tested SIT

Dimensions:

Height 220 cm

Width 370 cm

Depth 250 cm

Weight: 300 kg

Wood packaging nr. 2 crates:

WxDxH = 320x150x220 cm

WxDxH = 120x120x240 cm